Ventilair Engineers Private Limited

we offers effluent treatment plant for textile Industries. Here  BOD & COD level will be high so we have to provide biological method for control BOD & COD.

Additional Information:

• Production Capacity: As per demand
• Delivery Time: 45 days after advance

The working principle of the effluent treatment plant system is undertaken to be one of the most effective principles used in an effluent treatment plant system where a large amount of human-friendly chemicals is used that is applied to the water to make it free from all the factors that might be harmful to human and aquatic life. This is an important part of ETP that can be highlighted that helps to highlight that the working principles vary in several ways, furthermore, with the service of etp plant.

Effluent Treatment Plant(ETP Plant) is used for effluent treatment for Dairy Industry, Textile Industry and Food/Beverage Processing industries. Their common names are Effluent Treatment System, Effluent Treatment Plant, ETP, ETP Plant, Effluent Wastewater Treatment Plant, MBR Plant, Effluent Treatment Plant for Pharmaceutical industry, and many more.

We Ventilair Engineers provides effluent treatment plants for plastic industry. We have already installed this type of plant in VIKAS GLOBAL ONE, BLS ECOTEC KEHRANI, BLS REWARI ETC.

We Ventilair Engineers is working on a new project. It is domestic based Sewage Treatment Plant .We can say it Capsule Type Technology. It takes less space & low cost. It is very useful in small scale step. This is best Residential Sewage Treatment Plant.

A home sewage treatment plant, also referred to as a home wastewater treatment plant or home sewer treatment plant, is an essential component for domestic wastewater treatment. These systems play a crucial role in ensuring the proper treatment of wastewater generated in households, maintaining environmental hygiene and public health standards. While domestic sewage treatment plant prices may vary, homeowners can find installers near them to facilitate installation. With a focus on efficiency and reliability, domestic treatment plants provide cost-effective solutions for wastewater management. Whether it's a small domestic sewage treatment plant or a larger-scale system, these installations are vital for treating domestic sewage and ensuring safe disposal. Home sewage treatment systems offer householders peace of mind by effectively managing wastewater on-site, contributing to a cleaner environment and healthier communities.

Additional Information:

• Production Capacity: As per demand
• Delivery Time: 45 days after advance
• Packaging Details: As per work order

• Size: 5 meters. X 1.5 meters. 2.5 meters
• Power: 5HP
• Application: industries , college / schools, hotel, hospitals, residential colonies, complex, farm house, construction sites Residential complex etc
• Uses: To reuse waste water
• Material: MS Fabricated with FRP Coating
• Capacity: 75kld
• Automation grade are aslo automatic, semi automatic, and manuval

Ventilair Engineers Pvt. Ltd. (VEPL) is a leading Industrial Water Recycling ETP Manufacturer in India, providing advanced, energy-efficient & CPCB/SPCB compliant Effluent Treatment Plants (ETP) for wastewater treatment, reuse & Zero Liquid Discharge (ZLD) solutions.

We design and manufacture customized Water Recycling ETP Plants for industries like Pharma, Chemical, Textile, Food Processing, Electroplating, Automobile & Engineering, ensuring maximum water recovery & minimum discharge.

Importance of Industrial Water Recycling ETP

Industrial wastewater contains harmful pollutants such as BOD, COD, TSS, Oil & Grease, which must be treated before discharge.

✔️ Reduces environmental pollution

✔️ Meets CPCB / SPCB norms

✔️ Enables water reuse & recycling

✔️ Saves freshwater consumption

Technical Specifications – Water Recycling ETP Plant

Inlet vs Outlet Parameters

pH: 4.5–10 → 6.5–8.5

BOD: 200–3000 mg/L → <30 mg/L

COD: 500–10,000 mg/L → <250 mg/L

TSS: 100–5000 mg/L → <30 mg/L

Oil & Grease: 10–200 mg/L → <10 mg/L

System Specifications

Capacity: 1 KLD to 1000+ KLD

Efficiency: 90–95% BOD/COD removal

Technology: Physico-Chemical + Biological + Tertiary

Automation: Manual / PLC / SCADA

MOC: MS / FRP / RCC / SS

Power: 415V, 50Hz

Installation: Skid / Underground / Civil

Compliance: CPCB / SPCB

ETP Process Flow – Industrial Water Recycling System

1️⃣ Preliminary: Bar Screen, Oil Trap, Collection Tank

2️⃣ Equalization: Flow balance & pH control

3️⃣ Primary: Coagulation, Flocculation, Clarifier (TSS removal)

4️⃣ Secondary: Aeration (ASP/MBBR/SBR) + Clarifier

✔️ Removes up to 90% BOD & COD

5️⃣ Tertiary: PSF, ACF, UF/RO

✔️ Produces reusable water

6️⃣ ZLD (Optional): RO, MEE, ATFD

✔️ Zero Liquid Discharge

Water Reuse Applications

Cooling Towers | Boiler Feed | Gardening | Flushing | Process Use

Key Features of VEPL ETP Plants

✔️ High Efficiency with Low OPEX

✔️ Compact & Modular Design

✔️ Fully Automatic Operation

✔️ Low Chemical Consumption

✔️ Long Service Life

✔️ Custom Design as per Effluent Analysis

✔️ Suitable for High COD & Toxic Effluent

Industries We Serve

Pharma | Chemical | Textile | Electroplating | Food | Automobile

Why Choose VEPL?

✔️ 10+ Years Experience

✔️ 2000+ Installed Plants Across India

✔️ Expertise in Recycling & ZLD Systems

✔️ Turnkey ETP Projects

✔️ Strong CPCB Compliance Knowledge

we have already installed more then 2000 plant as mention in different location & different industry Industrial Water Recycling ETP Manufacturer | Effluent Treatment Plant Supplier India | Water Recycling Plant Manufacturer | ZLD Plant Manufacturer India | Industrial Wastewater Treatment Plant | ETP Plant for Pharma Industry | Chemical Industry ETP | Bio ETP Manufacturer | Turnkey ETP Project Supplier | Wastewater Recycling System India

• Flow Rate: 35,000 liters/day.
• pH: 6-9.
• TSS: 20-30 mg/l.
• BOD: <30 mg/l.
• COD: <50 mg/l.
• Oil & Grease: <10 mg/l.

• Preliminary: Screening and grit removal.
• Primary: Primary clarifier (settling of solids).
• Secondary:
  • Biological treatment (e.g., activated sludge, aeration tank).
  • Secondary clarifier (settling).
• Tertiary:
  • Filtration (sand or microfiltration).
  • Disinfection (UV or chlorine).

• Sludge Handling: Dewatering or drying beds.
• Automation: SCADA for monitoring; flow meters, pH sensors.

• BOD: <30 mg/l.
• COD: <50 mg/l.
• TSS: <30 mg/l.
• pH: ~7.
• Oil & Grease: <10 mg/l.

• Power: 3-phase, 415V.
• Land Area: 100-200 m².

• Discharge: Meets standards for safe release.
• Reuse: For non-potable purposes like irrigation.

Additional Information:

• Production Capacity: 5 PLANT/MONTHLY
• Delivery Time: 30 DAYS AFTER ADVANCE
• Packaging Details: AS PER PUCHASE ORDER

A 45 KLD Effluent Treatment Plant (ETP) for electroplating industries treats wastewater generated during the electroplating process, which often contains heavy metals (nickel, chromium, copper), acids, cyanides, and suspended solids. The treatment process involves three stages:

1. Primary Treatment: Removes large solids through screening, sedimentation, and coagulation.

2. Secondary Treatment: Removes dissolved metals using chemical precipitation, electrochemical treatment, and aeration to break down organic materials.

3. Tertiary Treatment: Polishes the effluent using filtration, UV disinfection, and additional polishing steps to meet discharge or reuse standards.

The ETP also includes sludge management to handle and dispose of metal-laden sludge. Benefits include heavy metal removal, regulatory compliance, water reuse, and environmental protection. The treated water can be reused in the plant, promoting sustainability, while valuable metals may be A 45 KLD Effluent Treatment Plant (ETP) for electroplating industries treats wastewater generated during the electroplating process, which often contains heavy metals (nickel, chromium, copper), acids, cyanides, and suspended solids. The treatment process involves three stages:

1. Primary Treatment: Removes large solids through screening, sedimentation, and coagulation.

2. Secondary Treatment: Removes dissolved metals using chemical precipitation, electrochemical treatment, and aeration to break down organic materials.

3. Tertiary Treatment: Polishes the effluent using filtration, UV disinfection, and additional polishing steps to meet discharge or reuse standards.

The ETP also includes sludge management to handle and dispose of metal-laden sludge. Benefits include heavy metal removal, regulatory compliance, water reuse, and environmental protection. The treated water can be reused in the plant, promoting sustainability, while valuable metals may be A 45 KLD Effluent Treatment Plant (ETP) for electroplating industries treats wastewater generated during the electroplating process, which often contains heavy metals (nickel, chromium, copper), acids, cyanides, and suspended solids. The treatment process involves three stages:

1. Primary Treatment: Removes large solids through screening, sedimentation, and coagulation.

2. Secondary Treatment: Removes dissolved metals using chemical precipitation, electrochemical treatment, and aeration to break down organic materials.

3. Tertiary Treatment: Polishes the effluent using filtration, UV disinfection, and additional polishing steps to meet discharge or reuse standards.

The ETP also includes sludge management to handle and dispose of metal-laden sludge. Benefits include heavy metal removal, regulatory compliance, water reuse, and environmental protection. The treated water can be reused in the plant, promoting sustainability, while valuable metals may be recovered from the effluent, creating an additional revenue stream.

(Precision Wastewater Treatment for a High-Precision Industry

Ventilair Engineers Pvt. Ltd. (VEPL) specializes in the design and manufacturing of high-performance Effluent Treatment Plants (ETPs) for the electroplating and metal finishing industry. Electroplating generates highly contaminated wastewater containing heavy metals, cyanides, acids, alkalis, and other hazardous chemicals that require precise and reliable treatment.

Advanced Treatment Process:

VEPL’s Electroplating ETPs follow a proven multi-stage process to ensure safe discharge or reuse of treated water:

• Equalization Tank – Balances flow and pollutant loads
• pH Correction – Neutralizes acidic or alkaline effluent
• Chemical Precipitation – Removes heavy metals using coagulants and flocculants
• Reduction-Oxidation (Redox) – Treats cyanide and hexavalent chromium
• Primary and Secondary Clarification – Settles solids and sludge
• Filtration Unit – Removes fine suspended matter
• Activated Carbon / Polishing Filter – Enhances water quality
• Sludge Dewatering System – For safe disposal of solid waste

These systems are designed in compliance with CPCB and State Pollution Control Board norms, with options for Zero Liquid Discharge (ZLD) and water recycling.

Key Features:

• Over 100 units successfully installed in the electroplating industry
• Compact, modular design for easy integration
• Low operating cost, durable components, and easy maintenance
• Available with automation for dosing, monitoring, and control

Our Prestigious Clients

Our expertise is reflected in the trust we’ve earned from some of the leading names in the electroplating and metal treatment sector. Some of our prestigious clients include:

• Laxmi Remote
• GTK
• Ajay Poly
• Mapple India
• Jindal Steel
• DTR
• Sumi Motherson
• Systematic Cons come
• Paramount
• TÜV
• Automatic Instruments
• Mac Bearing

We are proud to be a preferred partner for these esteemed organizations, providing them with sustainable, efficient, and fully compliant effluent treatment solutions.

For the most effective and reliable ETP systems in the electroplating industry, choose VEPL – delivering performance, compliance, and peace of mind.