Venus Enterprises

Brand	Par Specialty Polymers
Usage/Application	Construction
Packaging Size	20 Litre
Coverage Area	200 gm / Bag of Cement
Type	liquid
Color	Brown
Grade Standard	Chemical Grade
Packaging Type	Drum
Form	Liquid
Shelf Life	12 months
Country of Origin	Made in India

PAR Plast - LW is an integral liquid waterproofing admixture for concrete and cement mortar. It has good plasticising properties, makes concrete cohesive .

Additional Information:

• Packaging Details: 20 Ltr

Brand	Choksey
Usage/Application	Commercial
Packaging Size	5,20,200 litres & 250Kg drums
Type	Viscous Liquid
Color	Light yellow to brown medium
Grade Standard	Chemical Grade
Packaging Type	Drum
Country of Origin	Made in India

Masterplast Flow 30 is a polycarboxylic ether based superplasticiser with very high waterreduction capacity The mechanism is based on steric hindrance effect. Due to the presence ofside chains linked to the polymer backbone it generates steric hindrance effect which greatlystabilizes cement particle’s capacity to separate and disperse. The specific configuration of PCEpolymer allows its delayed absorption on to the cement particles & disperses themefficiently

Brand	Mcon
Usage/Application	Construction
Type	Poder
Coverage Area	3 to 5 Kg / Sq.Mt
Flexural Strength	14.7 Mpa
Color	Gray
Packaging Type	Bags
Packaging Size	25 - 50 kg
Form	Powder

Metallic and Non Metallic Floor Hardener.
METALLIC DRY SHAKEFLOOR HARDENERAreas of Application :-WarehousesShopping MallsFactoriesMCON HARD FLOORParking Areas & PodiumsFeatures :-Premium quality surface hardenerGood wear resistance rating & Impact resistanceGood Mechanical Strength & Easy CleaningMRP

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Usage/Application	Industrial
Brand	Choksey
Packaging Size	250kg
Type	Liquid
Color	Light yellow to brown
Grade Standard	Industrial Grade
Packaging Type	Drum
Type Of Admixture	Polycarboxylic
Form	Liquid
Country of Origin	Made in India

MASTERPLAST HPA 3 is a polycarboxylic ether based superplasticiser with very high waterreduction capacity. It is mainly developed for meeting the criteria of self compacting concrete withhigh early as well as long term strength at lower water cement ratio. The mechanism is based onsteric hindrance effect. Due to the presence of side chains linked to the polymer backbone itgenerates steric hindrance effect which greatly stabilizes cement particle’s capacity to separate anddisperse. The specific configuration of PCE polymer allows its delayed absorption on to the cementparticles & disperses them efficiently.

Packaging Size	250 Kg
Usage/Application	Concrete Admixture
Packaging Type	Drum
Grade Standard	Industrial Grade
Solid Content	98.0 +/- 1.0 %
Form	Liquid
Ph Value	7-9
Bulk Density	510+/-10 kg/m3

Plasticizers Super Plasticizers.

polymeric super plasticizers are known for improving the workability of concrete by reducing the need of water.

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)

Brand	Choksey
Usage/Application	Commercial
Packaging Size	250kg
Type	Liquid
Grade Standard	Industrial Grade
Packaging Type	Drum
Country of Origin	Made in India

MASTER PLAST SPL-19 is a high performance superplasticiser based on Sulfonated NaphthaleneFormaldehyde polymer design to allow considerable reduction of mixing water. It has a powerfuldispersing and deflocculating effect on the particles of cement. It increases the workability of concrete with an added advantage of high early and long term strength. It allows concrete to beeasily compacted with minimum vibrations.

Usage/Application	Construction
Packaging Size	20, 60 na d250 kg
Coverage Area	250 ml to 600 ml
Type	liquid
Color	Brown
Grade Standard	Industrial Grade
Packaging Type	Drum
Form	Liquid
Shelf Life	12 months

PAR PLAST SPL
Water reducing & retrading admixture for concrete PAR PLAST SPL is a highly effective, water reducing liquid admixture with no added chlorides. It provides a significant improvement in workability without any bleeding & segregation.

SPECIFICATION :
Meets the requirement of IS:9103 - 1999 and ASTMC- 494-86, Type B & D.

AREA OF APPLICATION:
• Concrete block and mortar
• Precast and reinforced concrete
• Brick laying mortar mixes
• Tremie concrete for moderate pours

FEATURES & BENEFITS:
• Reduces water upto 20 %
• Improves workability at a given w/c ratio
• Provides highly cohesive concrete mix without any bleeding and segregation
• Helps in reducing cement content for a required strength

METHOD OF APPLICATION:
The correct quantity of PAR PLAST SPL should be measured with recommended dispenser and should be thoroughly dispersed with approx. 5 - 10 % of the recommended water content (based on mix design by weight.)Mix concrete constituents along with balance approx. 90 - 95 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for2-3 minutes to get a homogeneous mix.

TECHNICAL INFORMATION :
Colour: Dark Brown
Sp. Gravity: 1.19 ± 0.04 at 30OC
Chloride Content: Nil
Base : Sulfonated Napthalene Formaldehyde
Dose: Upto 750 ml/ 50 kg bag of cement

PACKING: 20 Kg ,60 Kg & 250 Kg

Additional Information:

• Packaging Details: 20, 60, 250 kg

Brand	Par Specialty Polymers
Usage/Application	Construction
Packaging Size	20 and 250 Kg
Type	liquid
Color	Colourless to pale yellow
Grade Standard	Industrial Grade
Packaging Type	Drum
Form	Liquid
Shelf Life	12 months
Country of Origin	Made in India

For fast demoulding of pavers
PARPAVER, a specially formulated product reduces the setting time of cement so that the pavers can be removed from mould earlier.

APPLICATIONS
• For fast demoulding of pavers.

ADVANTAGES

• Reduces the setting time and help achieve high early strength.
• Highly cost effective,

CHARACTERISTICS
State : Liquid
Colour : Colourless to Pale Yellow
pH : 7 – 9
Sp Gravity : 1.30

GUIDELINES FOR USE
Dosage of 100 - 400 ml of PARPAVER per 50 kg bag of cement is recommended. The actual dosage has to be determined at the site.
1. Take 100 - 600 ml of PARPAVER and mix with 2 liters of water.
2. Prepare mortar with 50 kg cement bag.
3. Add 70% of water to the mortar and mix for 5 minutes.
4. Add PARPAVER solution to the cement mortar.
5. Mix thoroughly and ensure the solution is spread over the entire mortar.
6. Add water to achieve the required consistency.
7. Mix thoroughly and apply in normal fashion.

STORAGE :
Stable under normal conditions. Should be stored away from direct sunlight.

HANDLING :
Use of gloves and safety glasses is recommended.

PACKING :
Available in 20 kg and 250 kg

Additional Information:

• Packaging Details: 20 and 250 Kg

Brand	Fosroc
Usage/Application	concrete admixture
Packaging Size	200 kg
Category	Superplasticizer
Grade Standard	Analytical Grade
Shelf Life	12 month
Country of Origin	Made in India

Auramix 200 is a high performance superplasticiser intended for applications where high water reduction and long workability retention are required, Advantages   Low viscosity suitable for pumping of different grades of concrete to higher floors   Can also be utilized for high strength and high performance concrete   At high dosage it does not have high retardation effect   Higher E modulus   Improved adhesion to reinforcing and pre-stressing steel   Better resistance to carbonation   Reduced permeability   Better resistance to aggressive atmospheric conditions   Reduced shrinkage and creep   Increased durability Standards compliance Auramix 200 complies with IS:9103 , BS:5075 and ASTM-C494 Type 'G' . Description Auramix 200 is a unique combination of the latest generation superplasticisers , based on special polymers with long lateral chains. At the start of the mixing process this special polymers develop an electrostatic repulsion which greatly improves separation and dispersion of cement particles .This mechanism considerably reduces the water demand in flowable concrete. Auramix 200 combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability retention. Auramix 200 is a strong superplasticiser allowing production of consistent concrete properties around the required dosage. Technical support Fosroc provides a technical advisory service for on-site assistance and advice on mix design, admixture selection, evaluation trials and dispensing equipment. Properties Appearance : Yellowish to Brownish liquid pH : Minimum 6.0 Specific Gravity @ 27 0C : 1.03 - 1.07 Chloride content : Nil (As per BS:5075 Part I) Alkali content : Typically less than 1 g Na2O equivalent / litre of admixture. Dosage The optimum dosage of Auramix 200 to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. The normal dosage range is between 0.5 to 2.5 kg/100 kg of cementitious material. Use at other dosages Dosage outside the normal range quoted above can be used to meet particular mix requirements. Contact Fosroc for advice in these cases Effects of overdosing Over dosage may cause delay in the setting time (but better than conventional SNF based admixture ) and segregation. Packaging Auramix 200 is available in 200 litre drums and bulk tanker. Storage Auramix 200 has a minimum shelf life of 12 months provided the temperature is kept within the range of 20C to 500 C and stored in unopened containers. If temperature of the product fall outside this range then contact local Fosroc office for advice.

Usage/Application	Construction
Brand	PAR Specialty
Grade Standard	Industrial Grade
Coverage Area	250 ml / 50 kg bag of cement as per mix design
Packaging Size	250 Kg
Type	Liquid
Form	Liquid
Packaging Type	Barrel
Ph Value	5-6

PAR PLAST SPL
Water reducing & retrading admixture for concrete PAR PLAST SPL is a highly effective, water reducing liquid admixture with no added chlorides. It provides a significant improvement in workability without any bleeding & segregation.

SPECIFICATION :
Meets the requirement of IS:9103 - 1999 and ASTMC- 494-86, Type B & D.

AREA OF APPLICATION:
• Concrete block and mortar
• Precast and reinforced concrete
• Brick laying mortar mixes
• Tremie concrete for moderate pours

FEATURES & BENEFITS:
• Reduces water upto 20 %
• Improves workability at a given w/c ratio
• Provides highly cohesive concrete mix without any bleeding and segregation
• Helps in reducing cement content for a required strength

METHOD OF APPLICATION:
The correct quantity of PAR PLAST SPL should be measured with recommended dispenser and should be thoroughly dispersed with approx. 5 - 10 % of the recommended water content (based on mix design by weight.)Mix concrete constituents along with balance approx. 90 - 95 % of the recommended water content (based on mix design by weight) for 3 minutes. As soon as step 2 is over, the admixture dispersed in water (as in step-1) is to be added to the wet concrete and mix it further for2-3 minutes to get a homogeneous mix.

TECHNICAL INFORMATION :
Colour: Dark Brown
Sp. Gravity: 1.19 ± 0.04 at 30OC
Chloride Content: Nil
Base : Sulfonated Napthalene Formaldehyde
Dose: Upto 750 ml/ 50 kg bag of cement

PACKING: 20 Kg ,60 Kg & 250 Kg

Additional Information:

• Pay Mode Terms: T/T (Bank Transfer)
• Packaging Details: 20, 60 and 250 kg

Concrete Strength Grade	M60
Brand	Choksey
Usage/Application	Industrial
Packaging Size	250 kg
Color	White
Grade Standard	Industrial Grade
Packaging Type	Barrel
Type Of Admixture	Pc Based Admixture
Country of Origin	Made in India

MASTER PLAST SPL-8 is a Superplasticiser based on Sulfonated Naphthalene Formaldehyde Polymer with high strength properties. It is a liquid plasticizing admixture for cement concrete and mortars. It has a powerful dispersing and deflocculating effect on the particles of cement. It makes the concrete flowable with an added advantage of high early and long term strength. It allows concrete to be easily compacted with minimum vibrations. 

Usage/Application	Any Industry
Packaging Size	40 Kg
Type	Cement Powder
Yield	upto 100 Mpa
Color	Gray
Grade	Upto M100
Packaging Type	Bag
Compressive Strength	Upto M100

“MAGNICRETE MAGNIGROUT” is General Purpose High Strength Cement based grouting material designed to transfer load effectively, ensuring grouting precision and durability of structure. “MAGNIGROUT” inhibits corrosion of embedded steel and imparts high initial and ultimate flexural and compressive strength.

Packaging Size	500 gm
Brand	Dr Fixit
Category	Integral Waterproofing compound
Color	White
Form Of Chemical	Powder
Country of Origin	Made in India

Dr. Fixit Powder Waterproof is composed of waterproofing additives, dispersed in inert fine filler. It is an integral powder-waterproofing admixture used for waterproofing of concrete and cement plasters, because It makes concrete cohesive & reduces porosity & improve water tightness . Standard compliances / Specification } Meets the requirements of IS : 2645 – 75 standard Areas of Application } Basements, } Roof slabs and screeds, } Water retaining structures, } External plastering, } Bathrooms } Balconies. Features & Benefits } Corrosion - Chloride-free hence no chances of corrosion of reinforcement bars. } Water seepage - As an effective pore filler, helps to fill capillaries and pores to prevent water seepage. } Consistency - Makes the mix cohesive and denser, hence the concrete & plaster has reduced permeability . } Economics – Most economical water proofing additive, reduces water absorption. } Setting & strength - Does not affect the setting time and strength. Of the cured concrete. } Compatibility – Compatible with all types & grades of cements. Method of Application 1 HAND MIXING } Add Dr. Fixit Powder Waterproof to the dry mix of cement sand and mix evenly with a spade, until an even mix is obtained. } Add the measured quantity of potable water as per decided W/C ratio and mix to a homogeneous & uniform consistency concrete / mortars. } Place the mixed concrete / mortar into shuttering, provided } Cure the concrete / mortar surface as per regular practices of water curing. 2 MACHINE MIXING } Charge the Cement & sand as per the mix design into concrete mixer & mix for one minute. Add 500 g of Dr. Fixit Powder Waterproof for every 50 kg bag of cement. & mix for one minute. } Add the measured quantity of potable water as per W/C ratio and mix for 2-3 minutes to a lumps free homogeneous concrete. } Place the mixed concrete mortar into shuttering provided. } Cure the concrete / mortar surface as per regular practices of water curing.

Additional Information:

• Packaging Details: 500 gm

Brand	Fosroc
Usage/Application	waterproofing coating
Coverage	10mm X 20mm, 5 mm x 20 mm
Size	20mm x 10mm / 5 mm
Grade Standard	Analytical Grade
Thickness	5mm, 10 mm
Length	5 mtr, 10 mtr
Country of Origin	Made in India

Integral sealing for construction joints in concrete cast insitu. Convenient and problem solving in situations where a conventional waterstop would require complex shuttering Typical uses include secant piled and diaphragm walled basements, pile caps and casting against old concrete. Supercast SW20 can provide simple solutions to detailing pipe entries, construction joints in the vertical plane and to kicker joints. Can be linked to Supercast PVC*† waterstops to give an effective combination of waterstops which maintain network continuity. Advantages ?? Easy to install ?? Supercast SWX*† swellable adhesive enable full integration of Supercast SW20 and Supercast PVC networks ?? Solves detailing problems in conjunction with Supercast PVC range ?? Swelling properties unaffected by long term wet/dry cycling ?? Delayed swell action allows extra tolerance on site ?? Sustains effective seal in wet conditions Standards compliance Suitable for use in contact with potable water - Water Byelaws Scheme Approved product. Description The Supercast SW20 is a swellable waterstop which can be installed and positively linked into conventional Supercast PVC waterstop networks.This allows the use of Supercast PVC for expansion joints and Supercast SW20 for construction joints all the time maintaining an integrated network. The Supercast SW20 is made from high performance synthetic elastomer strips. The swelling action is the result of contact between water and hydrophilic groups which are part of the Supercast SW20 ''Basic Polymer'' molecular structure. The hydrophilic groups are not subject to extraction or loss of swelling performance by prolonged or repeated wetting. This is a unique feature of the basic polymer. Expansion of the waterstop creates a positive pressure against the face of the concrete joint, thus preventing water passing through the protected joint. Design criteria Supercast SW20 should be used to prevent the passage of water through non-movement joints in both new in-situ concrete and between new and existing concrete. Supercast SW20 increases in volume in the range of up to 300% and gives a resistance to hydraulic heads of up to 60 metres. Swelling of Supercast SW20 in fresh concrete is minimal, therefore maximising the positive pressure to seal the joint. Supercast SW20 is suitable for application between existing and newly placed concrete where there is little or no steel continuity and where up to 2mm movement may occur. Supercast SW20 waterstops should be positioned to ensure that a minimum of 80 mm cover of concrete is present to accommodate pressure developed during the swelling process. Typical Properties Form : Red Rectangular section elastomeric strips Size : 10mm X 20mm Solids content : 100% Unrestrained volumetric expansion : Up to 300% Application temperature range : -20° to 50°C Service temperature range : -30° to 70°C Hydrostatic pressure resistance : 60 metres (6bar) Watertightness : Seals up to 2mm gap if used in conjunction with Supercast SWX or Supercast SW Adhesive Specification Supplier specification Water swellable - Basic Polymer - hydrophilic waterstop (and attachments) where shown on the drawings, shall be Fosroc Supercast SW20 obtained from Fosroc. It shall be used in accordance with the manufacturer’s current application instructions.

Additional Information:

• Packaging Details: 20mm x 10 mm/ 5 mm