X

Vessco Overseas

Bhuleshwar, Mumbai, Maharashtra

| GST  27BMUPB5489F1ZJ

| TrustSEAL Verified

|

★★★★★
★★★★★
View Mobile Number 72% Response Rate

Our Product Range

+View All

Stainless Steel and Steel Products

Our product range includes a wide range of Stainless Steel 304 Pipes, Stainless Steel 304 L Pipes, Stainless Steel 316L Pipes, Stainless Steel 317L Pipes, Stainless Steel 321 Pipes and Stainless Steel 410 Bars.

Stainless Steel 304 Pipes
Interested in this product?
Get Best Quote

Stainless Steel 304 Pipes

Rs 200 / KgGet Latest Price

MaterialSS
Elevated TemperatureService to 1500 deg F
ApplicationsPressure Vessels,Petrochemical Equipment
Density0.285 lb/inch3
Ultimate Tensile StrengthMinimum 75,Typical 90 ksi
Yield StrengthMinimum 30,Typical 35 ksi at 0.2%

Dual certified 304/304H is used as a material of construction up to 1500F. Slight scaling begins at about 1200F. This is the 0.04% minimum carbon version of type 304 stainless. It has general corrosion resistance similar to the low carbon 304/304L. However, it is subject to carbide precipitation in the heat affected zone (HAZ) of welds. Weldments may be sensitive to HAZ intergranular corrosion in oxidizing acid environments, and to polythionic acid stress corrosion cracking. The carbide precipitation is not harmful to high temperature mechanical properties. 304/304H is welded using the 22Cr 11Ni filler wire (ER308), or covered electrodes (E308). Post-weld heat treatment is not necessary for most high temperature service.

Chemical Composition(%): 
Min/MaxCrNiCMnSiPSFe
Min1880.04-----
Max2010.50.120.750.040.03Balance

Specifications:
  • AMS 5513
  • ASME SA 240
  • ASTM A 240, ASTM A 959
  • EN 1.4301
  • UNS S30400, UNS S30409
  • W. Nr./EN 1.4948
  • Werkstoff 1.4301

Physical Properties:
Temperature, F2121600
Coefficient* of Thermal Expansion, in/F x 10-69.4-
Thermal Conductivity Btu  ft/ft2 hr F9.410.9

Maximum Allowable Stresses, ASME Section VIII, Div 1 Temperature:
Temperature, F2004006008001000120014001500
stress, ksi2018.316.615.2146.12.31.4

View Complete Details

Yes, I am interested!

Stainless Steel 304 L Pipes
Interested in this product?
Get Best Quote

Stainless Steel 304 L Pipes

Rs 200 / KgGet Latest Price

MaterialSS
Material GradeSS304L
Density0.285 lb/inch3
Melting Range2550-2590 deg F
Electrical Resistivity433 Ohm-circ mil/ft
Ultimate Tensile Strength75 ksi
Yield Strength30 ksi at 0.2%
Hardness MAXBrinell 201

304 is the original 18-8 stainless. It is produced in greater quantity than any other austenitic stainless steel. 304 provides useful resistance to corrosion in many environments ranging from moderately reducing to moderately oxidizing. Through the controlled addition of nitrogen, it is common for 304L to meet the mechanical properties of 304 straight grade. As a result, most products are dual certified as 304 and 304/304L.

Chemical Composition(%): 
Min/MaxNiCrMnSiCSPNFe
Min818-------
Max10.52020.750.030.030.0450.1Balance

Specifications:
  • AMS 5511, AMS 5513, AMS 5639, AMS 5647
  • ASME SA 240, ASME SA 312, ASME SA 479
  • ASTM A 240, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 312, ASTM A 479
  • UNS S30400, UNS S30403
  • W. NR./EN 1.4301, W. NR./EN 1.4307

Inventory:
  • 304 / 304L Coil, 304 / 304L Flanges, 304 / 304L Hex Bar, 304 / 304L Pipe, 304 / 304L Plate, 304 / 304L Round Bar, 304 / 304L Sheet, 304 / 304L Stub Ends, 304 / 304L Tees, 304 / 304L Welding Products

Features:
  • Good general corrosion resistance
  • Ease of cleaning
  • Excellent strength and toughness at cryogenic temperatures
  • Good formability

Applications:
  • Food processing and handling
  • Heat exchangers
  • Chemical process vessels
  • Conveyors
  • Architectural

Physical Properties:
Temperature, F70212932
Coefficient* of Thermal Expansion, in/inF x 10-6-9.2-
Thermal Conductivity
Btu  ft/ft2  hr F
-9.412.4
Modulus of Elasticity Dynamic, psi x 10629--

Typical Tensile & Impact Properties:
Temperature, F-425-320-100704008001200
Ultimate Tensile Strength, ksi25023015090706648
0.2 % Yield Strength, ksi100705035231915.5
Charpy Impact V-notch, ft-lbs8585-150---

View Complete Details

Yes, I am interested!

Stainless Steel 316L Pipes
Interested in this product?
Get Best Quote
MaterialSS
Steel GradeSS 316L
Density0.285 lb/inch3
Electrical Resistivity445 Ohm-circ mil/ft
Ultimate Tensile Strength75 ksi
Yield Strength30 ksi at 0.2%
Elongation40 %
Hardness MAXBrinell 217

316/316L is the most commonly used austenitic stainless steel in the chemical process industry. The addition of molybdenum increases general corrosion resistance, improves chloride pitting resistance and strengthens the alloy in high temperature service. Through the controlled addition of nitrogen it is common for 316/316L to meet the mechanical properties of 316 straight grade, while maintaining a low carbon content.

Chemical Composition(%):
Min/MaxNiCrMoMnSiCSPNFe
Min10162-------
Max1418320.750.030.030.0450.1Balance


Specifications:
  • AMS 5507, AMS 5648, AMS 5653
  • ASME SA 240, ASME SA 312, ASME SA 479
  • ASTM A 240, ASTM A 276, ASTM A 276 Condition A, ASTM A 276 Condition S, ASTM A 312, ASTM A 479
  • EN 1.4404
  • UNS S31600, UNS S31603
  • W. Nr./EN 1.4401
  • Werkstoff 1.4404

Inventory:
  • 316 / 316L Bar, 316 / 316L Coil, 316 / 316L Concentric Reducers, 316 / 316L Flanges, 316 / 316L Hex Bar, 316 / 316L Pipe, 316 / 316L Plate, 316 / 316L Round Bar, 316 / 316L Sheet, 316 / 316L Stub Ends, 316 / 316L Tees, 316 / 316L Welding Products

Features:
  • Improved general and localized corrosion to 304/304L stainless
  • Good formability
  • Good weldability

Applications:
  • Food processing
  • Marine
  • Pulp & paper
  • Chemical process vessels
  • Pharmaceutical Equipment

Physical Properties:
Temperature, F702129321832
Coefficient* of Thermal Expansion, in/inF x 10-6-9.210.110.8
Thermal Conductivity
Btu  ft/ft2  hr F
7.8---
Modulus of Elasticity Dynamic, psi x 10629---


View Complete Details

Yes, I am interested!

Stainless Steel 317L Pipes
Interested in this product?
Get Best Quote

Stainless Steel 317L Pipes

Rs 240 / KilogramGet Latest Price

Material GradeSS317 & 317L
StandardASTM A240
Ultimate Tensile Strength75 ksi Minimum
Yield Strength30 ksi Minimum at 0.2%
Elongation35 Percent
Hardness Max217 Brinell
MaterialSS

317L is a molybdenum bearing, low carbon content "L" grade austenitic stainless steel that provides improved corrosion resistance over 304L and 316L stainless steels. The low carbon provides resistance to sensitization during welding and other thermal processes. 317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.

Chemical Composition(%):
NiCrMoMnSiCNSPFe
11.0 - 15.018.0 - 20.03.0 - 4.02.0 Max.75 Max0.03 Max0.1 Max0.03 Max0.045 MaxBalance

Corrosion Resistance:
  • 317L has excellent corrosion resistance in a wide range of chemicals, especially in acidic chloride environments such as those encountered in pulp and paper mills. Increased levels of chromium, nickel and molybdenum compared to 316L stainless steel improve resistance to chloride pitting and general corrosion. Resistance increases with molybdenum alloy content. 317L is resistant to sulfuric acid concentrations up to 5 percent at temperatures as high as 120°F (49°C). At temperatures under 100°F (38°C) this alloy has excellent resistance to solutions of higher concentration. However, service tests are recommended to account for the affects of specific operating conditions that may affect corrosion behavior. In processes where condensation of sulfur-bearing gases occurs, 317L is much more resistant to attack at the point of condensation than conventional alloy 316. The acid concentration has a marked influence on the rate of attack in such environments and should be carefully determined by service tests.

Characteristics:
  • Improved general and localized corrosion to 316L stainless
  • Good formability
  • Good weldability

Applications:
  • Flue-gas desulfurization systems
  • Chemical process vessels
  • Petrochemical
  • Pulp and Paper
  • Condensers in power generation

Welding Stainless Steel 317L:
  • 317L is readily welded by a full range of conventional welding procedures (except oxyacetylene). AWS E317L/ER317L filler metal or austenitic, low carbon filler metals with molybdenum content higher than that of 317L, or a nickel-base filler metal with sufficient chromium and molybdenum content to exceed the corrosion resistance of 317L should be used to weld 317L steel.

View Complete Details

Yes, I am interested!

Stainless Steel 321 Pipes
Interested in this product?
Get Best Quote

Stainless Steel 321 Pipes

Rs 220 / KgGet Latest Price

Steel GradeSS321
Unit Pipe Length18-30 M
Pipe FluidWater
ShapeRound
TechniqueHot Rolled
Oxidation Resistant1600 deg F

Stainless 321 is a heat resistant, titanium stabilized, austenitic alloy that's commonly used for service in the 1000-1600F temperature range. 321 stainless is primarily used in applications that involve continuous and intermittent service temperatures within the carbide precipitation range of 800-1500F. Type 321 is similar to type 304 stainless but with a titanium addition of at least five times the carbon content. This titanium addition reduces or prevents carbide precipitation during welding and in the 800-1500F service conditions. In order to provide optimum resistance to intergranular corrosion and to polythionic acid stress corrosion cracking in service temperatures at 1500-1650F an air cool may be used.

Chemical Composition(%): 
CrNiMoCuTiC
PNMnSiPSNFe
179--5x(C+N)-----0.25----
19120.750.750.70.080.0450.1Balance210.040.030.1Bal

Characteristics:
  • Oxidation resistant to 1600F
  • Stabilized against weld heat affected zone (HAZ) intergranular corrosion
  • Resists polythionic acid stress corrosion cracking

Applications:
  • Aircraft piston engine manifolds and exhaust stacks
  • Expansion joints
  • Thermal oxidizers
  • Refinery equipment
  • High temperature chemical process equipment

Mechanical Properties:Average Elevated Temperature Tensile Properties:
Temperature, FUltimate Tensile Strength, ksi.2% Yield Strength, ksi
688438
4006220.5
6006218
8006217
100059.516.5
120045.516
140027.514

Welding stainless steel 321:
  • 321 Stainless is readily welded by all common methods including submerged arc. Appropriate weld fillers are most often specified as AWS E/ER 347 or E/ER 321. This alloy is generally considered to have comparable weldability to 304 and 304L stainless with the main difference being the titanium addition which reduces or prevents carbide precipitation during welding.

View Complete Details

Yes, I am interested!

Stainless Steel 410 Bars
Interested in this product?
Get Best Quote
Material GradeSS410
ShapeRound
Density0.276 lb/inch3
MaterialStainless Steel
StandardAMS 5504,ASTM A 240,EN 1.4006,UNS S41000,Werkstoff 1.4006
Electrical Resistivity343 ohm-circ mil/ft
Yield Strength32 - 42 ksi at 0.2%
Reduction of Area50 - 75 %

410 stainless is a corrosion and heat resistant 12% chromium steel. It is the most widely used of the hardenable stainless steels. Heat treated 410 has mechanical properties comparable to the engineering alloy steel AISI 4130, coupled with the additional benefit of good corrosion resistance. 410 is highly resistant to atmospheric corrosion. Maximum corrosion resistance is obtained by hardening and polishing. Because 410 is an air hardening steel, it must be given a high preheat, at least 350-400F before welding, and immediately given a full anneal before the weldment cools. Otherwise the metal will harden, and cracking is likely. Matching composition filler metals are available, AWS E410 covered electrodes and ER410 bare filler wire. Alloy 82 (AWS ERNiCr-3) filler wire has also been used. This nickel alloy is comparatively low strength, and therefore accommodates some of the strain which may otherwise contribute to cracking in the 410 weldment. Heat uniformly to 1200-1400F, remove from furnace and air cool. This should result in Brinell hardness about 187. For maximum softness, heat to 1500-1650F, furnace cool slowly to 1100F, after which air cooling is permissible. Brinell hardness should be approximately 155. Heat to 1750-1850F, soak at heat, and quench in oil. Light sections will also harden by air cooling. 410 will harden to some degree when heated 1500F and over unless slowly cooled to below the critical temperature. Soak at heat at least one hour, longer for large sections, and air cool. Tempering 410 in the range 750-1050F results in decreased impact toughness and somewhat reduced corrosion resistance.

Features:
  • Hardenable stainless which may be tempered as high as 1350F to produce high impact toughness.
  • Oxidation resistant through 1500F intermittently, 1200F continuously.
  • Corrosion resistant.

Heat Treated Condition - 1 Round Bar (Oil Quenched from 1800F):
Tempering Temperature, F-300500700105011501200130014001500
Tensile Strength, ksi193.5188.5181.6181.4124.1117.5113101.896.5131.8
0.2% Yield Strength149.8148.6143.6144.7110.3103.799.184.277.988.6
Elongation, %1717.316.81620.821.32223.52519.5
Reduction of Area, %56.859.760.761.167.266.166.568.869.959.6
Hardness, Brinell388388388361255235229207189257

View Complete Details

Yes, I am interested!

Stainless Steel 440C & 440B Bars
Interested in this product?
Get Best Quote

Stainless Steel 440C & 440B Bars

Rs 250 / KilogramGet Latest Price

Product Brochure

MaterialStainless Steel
Grade440A/B/C
Elastic Modulus200 (GPa)
Specific Heat460 (J/kg.K) at 0-100 C
Electrical Resistivity600 (nW.m)
Thermal Conductivity24.2 (W/m.K) at 100 C
Mean Coefficient of Thermal ExpansionC 10.1 (mm/m/C) at 0-100, 10.3 (mm/m/C) at 0-200 C, 11.7 (mm/m/C) at 0-600 C

440C Stainless steel is a type of modern steel and famous for its high corrosion resistant, wear resistance, strength and hardness qualities, among all the stainless alloys, capable of attaining (after heat treatment) the highest hardness (60 HRC). It has good resistance to the atmosphere, fresh water and mild acids. It has best resistance in the hardened, tempered and passivated condition. It allows creating a smooth polished surface and Razor sharp edges. It is being used in cutting instruments, rolling element bearings, valve seats, high quality knife blades, surgical instruments, chisels, ball bearings and valve parts and most commonly used in the production of Cutting tools, including Haircutting Scissors, daggers and swords. Grades 440A and 440B are identical except for slightly lower carbon contents (0.60 - 0.75% and 0.75 - 0.95% respectively), they attain lower hardness but have slightly higher corrosion resistances. Although all three versions of this grade are standard grades, in practice 440C is more available than the A or B variants. Another alloy 440F (UNS S44020) also exists, with the same high carbon content as 440C. 440 Steel family, there is a new modern kind of steel, known as 440V steel. Basically, it is the advancement of 440C steel. This steel has same level of hardness like 440C, but it has more corrosion resistant ability and more machine-ability.

Heat Resistance:
  • Not recommended for use in temperatures above the relevant tempering temperature, because of reduction in mechanical properties by over-tempering.

Heat Treatment:
  • Annealing - Full anneal - 850-900C, slow furnace cool to about 600C and then air cool. Sub-critical Annealing - 735-785C and slow furnace cool. Hardening - Heat to 1010-1065C, followed by quenching in warm oil or air. Oil quenching is necessary for heavy sections. Immediately temper at 150-370C to obtain a wide variety of hardness values and mechanical properties as indicated in the accompanying table. Tempering in the range 425-565C is to be avoided because of reduced impact resistance and corrosion resistance. Tempering in the range 590-675C results in lower hardness (the product become machinable) and high impact resistance.

Welding:
  • If welding is necessary pre-heat at 250C and follow welding with a full anneal. Grade 420 filler will give a high hardness weld (not as high as the 440C). Generally welding of 440C is not recommended due to its hardening capability which can lead to the formation cracks within or near the weld.

Machining:
  • In the annealed condition this grade is relatively easily machined; approximately the same as for high speed steel. If this grade is hardened machining becomes very difficult and probably impossible.

440C Related Specifications:
USAGermanyJapanAustralia
ASTM A276-98b 440C
SAE 51440C AISI 440C
UNS S44004
W.Nr 1.4125 X105CrMo17JIS G4303 SuS 440CAS 2837-1986 440C

View Complete Details

Yes, I am interested!

Stainless Steel 904L Square Pipes
Interested in this product?
Get Best Quote

Stainless Steel 904L Square Pipes

Rs 200 / KilogramGet Latest Price

Material GradeSS904L
MaterialStainless Steel
TechniqueHot Rolled
Density0.285 (lb / cu. in.)
Specific Gravity7.9
Specific Heat0.12 (Btu/lb/Deg F - [32-212 Deg F])
Electrical Resistivity480 (microhm-cm (at 68 Deg F))

Stainless Steel 904L is stocked by 23 North American distributors and produced by 28 large mills. Distributors will offer small quantity buys while mills will generally only sell large quantities, with delivery times anywhere from 10 to 50 weeks depending on size and form required This material is stocked primarily in Flat Rolled Products by 10 distributors but is also available to a lesser extent in Tubular Products, Wire Products, Piping Components, Bar Products, and Structurals.

Specifications:The following specifications cover Stainless Steel 904L:
  • AFNOR Z2CNDU 25-20
  • ASTM B625
  • ASTM B649
  • ASTM B673
  • ASTM B674
  • ASTM B677
  • DIN 1.4539
  • UNS N08904
  • Property Results

Related Metals:
  • VLX904(tm) 
  • AL 904L(tm) 
  • ronifer 1925 LC(tm)

Chemistry Data: 
Carbon0.02 max
Chromium19 - 23
Copper1 - 2
IronBalance
Manganese2 max
Molybdenum4 - 5
Nickel23 - 28
Phosphorus0.045 max
Silicon1 max
Sulphur0.035 max

Principal Design Features:
  • 904L is an austenitic stainless steel designed for moderate to high corrosion resistance. Its low carbon content improves cleanliness and weld strength.

Applications:
  • Utility scrubber assemblies, acid and fertilizer production equipment.

Machinability:
  • Slow speeds and positive feeds will minimize this alloy's tendency to work harden and glaze. Use chip breakers where possible to overcome problems with long draggy chips.

Welding:
  • Most common fusion and resistance methods may be employed. For maximum corrosion resistance, it is recommended to use filler metals of equal or higher alloy content.

Hot Working:
  • Hot work should proceed after uniform heating to 2000-2200 F. Doe not work the material at less than 1800 F. Full annealing should follow any hot work to reattain maximum ductility and corrosion resistance.

Cold Working:
  • Although higher forces are required, 904L will respond in a similar fashion to other austenitic stainless steels like 304, 316 or 317. Most common operations can be successfully performed.

Annealing:
  • 1920-1990 F (1050-1090 C), rapid cooling..

Hardening:
  • This alloy does not respond to heat treatment.. It may only be hardened by cold reduction.

Mechanical Data:
  • Form: Sheet
  • Condition: Test Specimen Annealed
  • Temper: 70
  • Tensile Strength: 87
  • Yield Strength: 40
  • Elongation: 50
  • Reduction of Area: 55
  • Rockwell: B79

View Complete Details

Yes, I am interested!

Stainless Steel Flanges
  • Stainless Steel Flanges
  • Stainless Steel Flanges
Interested in this product?
Get Best Quote

Stainless Steel Flanges

Rs 400 / PieceGet Latest Price

Product Brochure

MaterialSS
Material StandardAISI
Surface FinishedPolished
TechniqueHot Rolled
Inner Diameter4-6 inch
Outer Diameter8-12 inch

We are engaged in manufacturing and exporting wide range of Stainless Steel Flanges that are available in variables sizes for different applications in waterworks, petrochemicals, refineries, chemical industry and construction works. Owing to its high quality, optimum performance, less maintenance, our range of flanges is appreciated by our clients and is available in various material configurations like stainless steel, carbon steel, alloy steel, nickel alloys and copper alloys. Based on the sizes, dimensions, shapes and lenght of these flanges, we can customize the products as per our respected clients requirement.

Types of Flanges:
  • Blind
  • Deck Flange
  • Lap Joint
  • Long Weldneck
  • Oriface
  • Ring Joint
  • RTJ
  • Slip - On
  • SORF
  • Socket Weld
  • Spectacle Blind
  • Weldneck

Specifications:
Grade Designation AISIC MaxMn MaxP MaxS MaxSI MaxCRNIMO
2010.155.50/7.500.060.03116.00/18.003.50/5.50-
2020.157.50/10.000.060.03117.00/19.004.00/6.00-
3010.1520.0450.4116.00/18.006.00/8.00-
3020.1520.0450.03117.00/19.008.00/10.00-
3030.1520.20.15(min)117.00/19.008.00/10.000.6

View Complete Details

Yes, I am interested!

SS 904L Sheets
Interested in this product?
Get Best Quote

SS 904L Sheets

Rs 185 / KgGet Latest Price

Material GradeSS 904L
MaterialSS
ShapeRectangular
ThicknessAvailable in 0-1 mm,1-2 mm,2-3 mm,3-4 mm
StandardASTM B625 / ASME SB625
Dimensions1250 x 2500 mm
Surface FinishedPolished

Product DescriptionWe offer robust performance SS 904L Sheets that are manufactured using extreme quality raw material. We perform quality and performance measure inspection of these Stainless Steel 904 L Sheets under various parameters in order to get smooth flow of operation.

View Complete Details

Yes, I am interested!

Stainless Steel 310 Sheets
Interested in this product?
Get Best Quote

Stainless Steel 310 Sheets

Rs 150 / KgGet Latest Price

Thickness2-20 mm
ShapeRectangular
Steel GradeSS310
MaterialStainless Steel
Unit Length9-12 m
StandardASTM A276, ASTM A479
Oxidation Resistance2000 Degree F

Vessco Overseas is known for supplying speciality metal alloys, particularly austenitic stainless steels like 310 in the form of plate, sheet, bar, pipe, pipe fittings, flanges, tube and weld wire. Stainless steel 310/310S is an austenitic heat resistant alloy having high resistance to oxidation under mildly cyclic conditions through 2000ºF.


This steel has a high nickel and chromium content that offers comparable corrosion resistance, high resistance to oxidation and retention of larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450°F, and low magnetic permeability.

 

The chemical composition of 310UNS S31000 is:

Cr

Ni

C

Si

Mn

P

S

Mo

Cu

Fe

24.0-26.0

19.2-22.0

.25 Max

1.50 Max

2.00 Max

.045 Max

.03 Max

.75 Max

.50 Max

Balance

310S UNS S31008 Chemical Composition, %

Cr

Ni

C

Si

Mn

P

S

Mo

Cu

Fe

24.0-26.0

19.2-22.0

.08 Max

1.50 Max

2.00 Max

.045 Max

.03 Max

.75 Max

.50 Max

Balance


Application:

  • Automobile Industry, Construction, Pharmaceutical/Chemical Industry, Oil & Gas Industry

 

View Complete Details

Yes, I am interested!

SS 316L Sheets
Interested in this product?
Get Best Quote

SS 316L Sheets

Rs 200 / KgGet Latest Price

ThicknessAvailable in 0-1 mm, 1-2 mm, 2-3 mm, 3-4 mm, 4-5 mm
ShapeRectangular
Steel GradeSS316 L
MaterialStainless Steel
Surface TreatmentHot Rolled
StandardJIS,AISI,ASTM,GB,DIN,EN,etc

Product DescriptionWith the valuable assistance of a skilled team of professionals, we are offering an extensive range of high-quality SS 316L Sheets.Highly used in various industries and domestic sectors, these are offered at industry competent prices.

Features:
  • High tensile strength
  • Long service life
  • Resistant against corrosion
  • Highly machinable
  • Very strong and tough
  • Can be hardened by heat treatment
  • Magnetic

View Complete Details

Yes, I am interested!

Stainless Steel 15-5 Ph Sheets
  • Stainless Steel 15-5 Ph Sheets
  • Stainless Steel 15-5 Ph Sheets
Interested in this product?
Get Best Quote

Stainless Steel 15-5 Ph Sheets

Rs 340 / KilogramGet Latest Price

Steel GradeSS304 L
Thickness2-60 mm
ShapeRectangular
MaterialStainless Steel
Material GradeH 900, H 925, H 1025, H 1075, H 1100, H 1150
Surface TreatmentHot Rolled

At Vessco Overseas, we offer 15-5 PH stainless steel sheet in two configurations Stainless Steel 15-5 Ph Sheets. 15-5 PH stainless steel sheet is a high performance material and is used for many applications in the aerospace, food processing, metalworking, chemical and petrochemical industries. Products manufactured using 15-5 PH stainless steel include valves, fittings, fasteners, washers, shafts and gears. If you would like to inquire about pricing levels for Altemp Alloys 15-5 PH sheet, please contact one of our in-house product specialists.


15-5 precipitation hardened (PH) stainless steel sheet exhibits good transverse strength and fatigue resistance as well as good corrosion resistance. It is a cost-effective material, offering many of the same properties as more expensive high-nickel, non-ferrous alloys. Its high performance in high wear, corrosive environments make it a popular material for many industrial applications, especially for the aerospace, food service, metalworking, chemical and petrochemical industries.


While inherently strong and durable, 15-5 PH stainless steel can be further strengthened with a three-step heat-treatment process. The first step is to condition the metal using austenite. Step two is to allow the metal to cool until the austenite turns to martensite. The final step is to precipitation, Precipitation hardened stainless steel alloys exhibit improved strength, corrosion resistance, superior durability and performance under heat and stress.


For applications that require performance in high heat conditions, 15-5 PH can be heat treated after it has been precipitation hardened to provide improved resistance to stress corrosion cracking at high temperatures. In order to minimize distortion and stress in the finished product, fabrication is recommended after the metal has been heat treated.


The chemical composition of 15-5 PH is:

  • Chromium: between 14.0 and 15.50 percent
  • Nickel: between 3.50 and 5.50 percent
  • Copper: between 2.50 and 4.50 percent
  • Columbium plus Tantalum: between 0.15 and 0.45 percent
  • Manganese: up to 1.00 percent
  • Silicon: up to 1.00 percent
  • Carbon: up to 0.07 percent
  • Phosphorus: up to 0.04 percent
  • Sulfur: up to 0.03 percent

 

View Complete Details

Yes, I am interested!

SS Sheets
Interested in this product?
Get Best Quote

SS Sheets

Rs 200 / KgGet Latest Price

Thickness3-4 mm
Material GradeSS304L
MaterialSS
ShapeRectangular
Material StandardASTM A240

We have been offering to our clients a vast range SS Sheets, that are offered in various specifications to our clients. Catering to the requirements of various industries, our range is known for its corrosion resistance, durability & high tensile strength. Our clients can avail from us Plates that are manufactured using high grade stainless steel. These cater to the requirments of various industries and are known for their attributes, such as high tensile strength, corrosion resistance & long life usage.

Specifications:
  • Stainless Steel: Plates as per ASTM A240, Gr. TP 304, 304L, 304LN, 309, 309S, 309H, 310H, 316, 316L, 316H, 316LN, 31611, 317, 317L, 321, 321 H, 347, 347H, 409, 410, 420, 430 etc.
  • Nickel Alloy: ASTM / ASME SB 162 UNS 2200 (NICKEL 200), ASTM / ASME SB 162 UNS 2201 (NICKEL 201), ASTM / ASME SB 127 UNS 4400 (MONEL 400),ASTM / ASME SB 463 UNS 8020 (ALLOY20 / 20 CB 3), ASTM / ASME SB 424 UNS 8825 (INCONEL 825), ASTM / ASME 513 168 UNS 6600 (INCONEL 600), ASTM / ASME SB 409 UNS 8810/8811 (INCONEL 800/8005T), ASTM / ASME SB 443 UNS 6625 (INCONEL 625), ASTM / ASME SB 575 UNS 10276 (HASTELLOY C276)
  • Alloy Steel Plates: As per ASTM A387 Gr. 2, 9, 11, 12 & 22 in class 1 & 2 ASTM A204 Gr A & B, DIN 17175 Gr. 15Mo3 & 16Mo3 WITH IBR Test Certificate.

View Complete Details

Yes, I am interested!

Stainless Steel 304 Round Bar
Interested in this product?
Get Best Quote

Stainless Steel 304 Round Bar

Rs 150 / KgGet Latest Price

Material GradeSS304
ShapeRound
Usage/ApplicationConstruction
MaterialStainless Steel
Single Piece Length>36 meter
Thickness/Diameter2-3 inch
TechniqueHot Rolled

Stainless Steel Round Bar T-304/304L is an excellent choice for its tensile strength, high resistance to rust, and high fabrication ability. Cost-effective and versatile material, 304 round bar is suitable for most applications where durable support and corrosion resistance are required.


Properties:

  • Excellent weight-bearing properties, high corrosion resistance, superior durability, fair resistance to thermal and electrical conductivity, ease of fabrication, and non-magnetic.


Common Uses:

  • concrete footings, piers, walls, beams, columns, supports, braces, railings, handles, and ornamental work.

View Complete Details

Yes, I am interested!

Stainless Steel 347 Pipes
Interested in this product?
Get Best Quote

Stainless Steel 347 Pipes

Rs 250 / KgGet Latest Price

Steel GradeSS347
Good Creep StrengthApprox 1500 Degree F
Density0.286 lb/inch3
Melting Point2550 - 2635 Degree F
Tensile Strength75 ksi
Yield Strength30 ksi at 0.2%
Elongation40 %
Hardness Max201 Brinel
Temperature800 Degree F and 1500 Degree F

Type 347 stainless steel has slightly improved corrosion resistance over type 321 stainless steel in strongly oxidizing environments. Type 347 is stabilized with columbium, it is preferable for aqueous and low temperature environments due to its good resistance to intergranular attack. Both 347 and 321 offer good resistance to polythionic acid stress corrosion cracking, encountered in oil refineries. The high temperature oxidation resistance of 347 is similar to that of 304 stainless steel. Useful to 1500F. Often in many product forms, the grain size and carbon content can meet both the 347S and 347H requirements. Appropriate weld fillers are AWS ER347 bare wire and E347 covered electrodes.

Chemical Composition(%): 
Min/MaxCrNiCb + TaCSiMnPSFe
Min179Cb 10xc
(Cb 8xC)
0.04--
--
Max191310.080.7520.0450.03Balance

Specifications:
  • AMS 5512, AMS 5646, AMS 5680
  • ASME SA 240
  • ASTM A 240, ASTM A 269, ASTM A 479, ASTM A262 Practice E
  • MSRR 5632
  • PWA 300, PWA F17 LCS
  • UNS S34700, UNS S34709
  • W. Nr./EN 1.4550

Physical Properties:
Temperature, F70212932
Coefficient* of Thermal Expansion, in/inF x 10-6-9.2-
Thermal Conductivity
Btu  ft/ft2  hr F
-112.5147.7
Modulus of Elasticity, Dynamic psi x 10628--

Typical Tensile and Impact Properties:
Temperature, FUltimate Tensile Strength, ksi.2% Yield Strength, ksi
688438
4006220.5
6006218
8006217
100059.516.5
120045.516
140027.514

Applications:
  • Oil Refineries
  • Fluid catalytic cracking units (FCC)
  • Hanger rods
  • Recuperator tube sheets, shell, supports
  • Especially where temperatures exceed 550F and resistance to sulfidation is needed
  • Fired heater tubes
  • Distributor trays and thermowells
  • Equipment in and around reactors (good resistance to polythionic acid)

View Complete Details

Yes, I am interested!

Stainless Steel 420 Pipes
Interested in this product?
Get Best Quote

Stainless Steel 420 Pipes

Rs 200 / KilogramGet Latest Price

Thickness2-8 mm
Diameter1-5 inch
ShapeRound
Unit Pipe Length9-18 m
Material GradeSS420
Pipe FluidWater

Type 420 Stainless Steel provides both outstanding corrosion resistance and exceptional wear resistance. To obtain the best possible strength and wear resistance, oil quench alloy 420 at a temperature between 1800° F and 1950° F. Alloy 420 Stainless Steel is commonly used in dental and surgical instruments, cutlery, plastic molds, pump shafts, steel balls, and numerous hand tools. Because of its air hardening properties, type 420 Stainless Steel is not often welded, although, it is possible. When welding with stainless steel type 420, preheat the steel to a temperature between 300° F and 400° F. After welding, temper the work piece at temperature for two hours. When hot working, it is recommended to gradually raise the temperature to 1400° F and then gradually raise the temperature to anywhere from 2000° F to 2200° F. While working, avoid letting the work temperature drop below 1600° F by frequently reheating the steel. To prevent cracking, furnace cool the work piece slowly after working. Any extreme cold forming will cause alloy 420 Stainless Steel to crack, but it can endure minor cold work. Often in many product forms, the grain size and carbon content can meet both the 347S and 347H requirements. Appropriate weld fillers are AWS ER347 bare wire and E347 covered electrodes.

View Complete Details

Yes, I am interested!

Stainless Steel 430 Pipes
Interested in this product?
Get Best Quote

Stainless Steel 430 Pipes

Rs 200 / KilogramGet Latest Price

Thickness2-10 mm
Material GradeSS430
Unit Pipe Length10-18 m
StandardAISI 430, ASTM A 240
MaterialSS
ShapeRound

Extra Bright Annealed Soft Temper 430 Stainless Strip Steel is the most popular of all the straight chrome stainless steels. Its principal use is for decorative purposes. Because of its excellent heat and corrosion resistant properties, its ductility and because it costs less than the chrome-nickel grades, this Type 430 Stainless Steel Strip is used in countless applications. These uses are primarily for stainless and decorative purposes including household appliances, metal molding, metal trim, cabinet hardware, hinges, drawn and formed parts and stampings.

Type 430 Characteristics:
  • (17% straight chrome) Ferritic Stainless Steel Strip. This is the basic and most generally used straight chromium (Ferritic) Stainless Strip Steel. Because of its high chromium content, it is highly corrosion and heat resistant but somewhat less than Types 301, 302 and 304. It possesses good physical and mechanical characteristics but with ductility at about 75% of low carbon strip and inferior to that of the chrome-nickel grades. Like other straight chromium grades, Type 430 Annealed is subject to stretcher strains. Skin passing following annealing greatly reduces this possibility although this reduces ductility somewhat. Likewise a condition akin to stretcher strains may sometimes develop during deep drawing known as roping. Roping is characterized by the appearance of shallow ridges and valleys in the side walls and caused by excessive stretching. Type 430 is magnetic in all conditions, is not heat-treatable for hardening purposes and is weldable but its welds are not suitable in rigorous service. The tensile strength for SS 430 in the annealed condition is cataloged at 65,000 PSI minimum, its yield at 30,000 PSI minimum and elongation at 22%.
  • Complete Facilities for Slitting - Shearing - Blanking and Edging. Available in coils or cut lengths. Sizes other than those listed and in all thicknesses .001 and heavier are obtainable and may be ordered for you.

Analysis:
  • C .12 Max. 
  • Mn 1.00 Max. 
  • Si 1.00 Max. 
  • P .040 Max. 
  • S .030 Max.
  • Cr 16.00/18.00
  • Coils or Lengths

View Complete Details

Yes, I am interested!

Stainless Steel 310/310S Pipes
Interested in this product?
Get Best Quote
Usage/ApplicationOil & Gas Industry
Thickness2-4 Mm
Oxidation Resistance2000 deg F
Surface FinishedPolished
ShapeRound

Stainless steel 310/310S is an austenitic heat resistant alloy with excellent resistance to oxidation under mildly cyclic conditions through 2000F. Its high chromium and nickel contents provide comparable corrosion resistance, superior resistance to oxidation and the retention of a larger fraction of room temperature strength than the common austenitic alloys like Type 304. Stainless 310 is often used at cryogenic temperatures, with excellent toughness to -450F, and low magnetic permeability. **As you can see below, Grade 310S is a low carbon version of grade 310. 310S is less prone to embrittlement and sensitization in service.

310 UNS S31000 Chemical Composition(%): 
CrNiCSiMnPSMoCuFe
24.0-26.019.2-22.0.25 Max1.50 Max2.00 Max.045 Max.03 Max.75 Max.50 MaxBalance

310S UNS S31008 Chemical Composition(%):
CrNiCSiMnPSMoCuFe
24.0-26.019.2-22.0.08 Max1.50 Max2.00 Max.045 Max.03 Max.75 Max.50 MaxBalance

Characteristics:
  • Moderate strength at high temperature
  • Resistance to hot corrosion
  • Strength and toughness at cryogenic temperatures

Applications:
  • Kilns Heat Exchangers
  • Radiant Tubes
  • Muffles, retorts, annealing covers
  • Tube hangers for petroleum refiing adn steam boilers
  • Coal gasifier internal components
  • Saggers
  • Furnace parts, conveyor belts, rollers, oven linings, fans
  • Food processing equipment
  • Cryogenic structures

Fabrication with Stainless 310/310S:
  • Type 310/310S is readily fabricated by standard commercial procedures. In comparison to carbon steel, stainless steels are tougher and tend to work harden rapidly. Type 310/310S can be welded using all of the common welding processes.

Representative Tensile Properties: 
Temperature, FUltimate Tensile Strength, ksi.2% Yield Strength, ksiElongation Percent
70803552
100067.820.847
120054.120.743
140035.119.346
160019.112.248

View Complete Details

Yes, I am interested!

Copper Nickel Sheets
Interested in this product?
Get Best Quote

Copper Nickel Sheets

Rs 2,750 / KilogramGet Latest Price

Thickness2-10 mm
MaterialCopper Nickel
ShapeRectangular
StandardASTM / ASME SB 171 UNS No C 70600 (CU -NI- 90/10)
Length5-15 m

Our squads of well-experienced professionals, we are dedicated towards in manufacturing and exporting Copper Nickel Sheets, Plates, Coils. We manufacture these plates and coils with the combination of copper and nickel in accurate compositions. It plays a vital role in numerous construction and architectural works. Copper nickel is known for its great resistance to seawater, as well as many other hazardous elements presented to metals. C706 and C715 are commonly used in seawater environments because of total resistance to barnacle growth, which is created by a thin tenacious protective film formation.

 

Features:

  • High Strength
  • Excellent resistance to marine corrosion and bio fouling
  • Greater resistance to sea water flow
  • Good fabric ability
  • High Strength
  • Good to very good resistance to uniform corrosion

 

Applications:

  • Sea water Piping Systems
  • Pressure Vessels
  • Offshore fire water systems
  • Hull Plate
  • Heat exchangers and condensers
  • Sheathing of legs and risers on offshore platforms and boat hulls
  • Hydraulic lines
  • Fish cages for aquaculture
  • Desalination units.

Commonly Searched:

  • Copper-Nickel Steel Sheet Manufacturer, Copper-Nickel Steel Plate Manufacturer, Copper-Nickel Steel Coil Manufacturer, Copper-Nickel Steel Sheet Exporter, Copper-Nickel Steel Plate Exporter, Copper-Nickel Steel Coil Exporter, Copper-Nickel Steel Sheet Supplier, Copper-Nickel Steel Plate Supplier, Copper-Nickel Steel Coil Supplier

 

View Complete Details

Yes, I am interested!
© Vessco Overseas. All Rights Reserved (Terms of Use)