Vidhyut Technical Service

Brand

wohner

CAPUS®Panel – The Switch disconnector Family is absolutely versatile.

With the new families CAPUS®S32 and CAPUS®BB32 Wöhner expands its switches Portfolio. Better technical features, a new design, a complete accessories family and a new competence enter for special requests make the Wöhner Proposal attractive and interesting.

Current Rating	16 A
Poles	3 Pole
Rated Voltage	250 V DC
Application	Solar PV
Mounting Type	Panel Mount
Breaking Capacity	6 kA
Protection Class	IP55

With spring-controlled switch mechanism for frequent switching as per utilisation category "A"
FLAG indicator shows the switch setting
Fuses can be changed safely and without tools thanks to double-breaking main contacts
Additional visible separating section by removing the cover incl. fuses
Can be used as mains disconnector as per IEC / EN 60204-1 (main switch)
Also as an Emergency Off switch in combination with the red-yellow door coupling twist handle

Bar Width	120mm
Thickness	10 mm
Finish	Tinned
Grade	EC Grade
Length	3 m
Insulation	Heat Shrink
Hardness	Half Hard
Usage	Panel Board

Part No.: 01623000

busbar 12 x 10

length 2.40 m, tinned

System

60Classic, 30Compact 3P

Current Rating

250A

Wöhner has busbar systems like CrossBoard up to 125 A, 30Compact up to 360 A, 60Classic and 185mm up to 2500 A and the Central Feed Unit up to 4000 A. Based on the current information we will indicate what flat or special profile busbar type is most suitable for your Project.

Thickness	2 mm
Length	2m

The laminated Cu busbars considerably reduce the effort of connecting busbars. The bending devices required for solid copper busbars are unnecessary. The 2mm-thick insulation means that no additional covering is required.

Current Rating

250A

touch-safe protected busbar system up to 250 A
rear feedable
plug and play
easy to screw to mounting plates
completely pre-assembled and immediately ready for use

Bar Width	75 mm
Thickness	6 mm
Finish	Plain
Grade	EC Grade
Length	1 m
Insulation	Bare
Hardness	Half Hard
Usage	Panel Board

Part No.: 01323000

flexible copper busbar, plain, insulated

8x 24 x 1

641 A, length 2 m

System Type	Bus Duct
Current Rating	100 A
Conductor Material	Copper
Rated Voltage	230 V
No. Of Poles	3 Pole
Phase	Single Phase
Mounting	Vertical

Part No.: 32140000

EQUES^®60Classic

busbar adapter 250 A, 3-pole

105 x 190

connection to the system top or bottom

for Eaton NZM2-XKR4O, NZM2-XKR4U

for busbars 12, 15, 20, 25, 30 x 5, 10 and section busbars

System

60Classic

Support Type	Triple Pole
Suitable Busbar Size	30x5mm
Material	Polycarbonate
Dielectric Strength	3 kV
Operating Temp	Up To 80 C
Mounting	Wall Mount
Color	White
Usage	Panel Board

Part No.: 01508000

universal busbar support UL

3-pole, with internal screw holes

for busbars 12, 20, 30 x 5, 10

System

60Classic

Type	PCB
Connection Type	Screw
Cable Size	0.14–1.5 mm²
Rated Current	16 A
Rated Voltage	230 V
Mounting Type	PCB Mount
Number Of Poles	1 pole
Housing Material	Bakelite

Part No.: 31550000

connection terminal, front connection

6 - 35 mm²

for 31549, 31561

Usage/Application	Industrial
Brand	woehner

he CrossBoard from Wöhner, world market leader for busbar system technology and leading solution provider for the distribution and control of electrical power, has established itself and proven itself as a modular and open basic system since its market launch. Now the company is presenting a decisive upgrade – and is pushing the limit from 160 amps to 800 amps rated current: the new standard for the industry. 

Usage/Application	Power Distribution
Length	54mm
Size	W x H x D: 54 x 14 x 2000

Part No.: 01509000

flexible copper busbar, plain, insulated

10x 50 x 1

1244 A, length 2 m

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 30 x 40

Part No.: 01608000

double-T section busbar 720 mm²

length 2.40 m, tinned

System

60Classic, centre feed unit

Usage/Application	Power Distribution
Length	28mm
Size	W x H x D: 28 x 9 x 2000

Part No.: 01611000

flexible copper busbar, plain, insulated

5x 24 x 1

470 A, length 2 m

Usage/Application	Power Distribution
Length	36mm
Size	W x H x D: 36 x 9 x 2000

Part No.: 01611000

flexible copper busbar, plain, insulated

5x 24 x 1

470 A, length 2 m

Usage/Application	Power Distribution
Length	36MM
Size	W x H x D: 36 x 14 x 2000

Part No.: 01613000

flexible copper busbar, plain, insulated

10x 32 x 1

894 A, length 2 m

Usage/Application	Power Distribution
Length	2400
Size	W x H x D: 2400 x 20 x 5

Part No.: 01620000

busbar 20 x 5

length 2.40 m, tinned

System

60Classic

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 15 x 5

Part No.: 01619000

busbar 15 x 5

length 2.40 m, tinned

System

60Classic

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 12 x 5

Part No.: 01618000

busbar 12 x 5

length 2.40 m, tinned

System

 

60Classic, 30Compact 3P, 30Compact 5P

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 20 x 10

Part No.: 01624000

busbar 20 x 10

length 2.40 m, tinned

System

60Classic

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 25 x 5

Part No.: 01621000

busbar 25 x 5

length 2.40 m, tinned

System

60Classic

Usage/Application	Power Distribution
Length	44mm
Size	W x H x D: 44 x 9 x 2000

Part No.: 01614000

flexible copper busbar, plain, insulated

5x 40 x 1

736 A, length 2 m

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 30 x 10

Part No.: 01625000

busbar 30 x 10

length 2.40 m, tinned

System

60Classic, 185Power, centre feed unit, 100Energy

Usage/Application

Industrial

Part No.: 01625000

busbar 30 x 10

length 2.40 m, tinned

System

60Classic, 185Power, centre feed unit, 100Energy

Jack Size	3.5 Mm
No. Of Poles	3 Pole
Mounting Type	PCB Mount
Connector Gender	Female
Termination Type	Solder Type
Contact Material	Brass
Plating	Nickel Plated
Housing Material	Plastic

Part No.: 01593000A

CRITO^®CrossBoard

connection module

with box terminals 6 - 50 mm² / AWG 10 - AWG 1

3-pole

System

CrossBoard® 125A / 250A, CrossBoard® 800 A

Material	Copper
Current Rating	100 A
Bar Width	60mm
Thickness	10 mm
No. Of Bars	Single Bar
Finish	Plain
Grade	EC Grade
Application	Panel Board

Part No.: 32981000A

EQUES^®60Classic

busbar adapter 100 A

for circuit breaker ABB MS49x and Siemens Sirius frame size S3, 200 mm long

72 x 200, with leads AWG 4 (25 mm²), with metal plate, top connection to the system

for busbars 12, 15, 20, 25, 30 x 5, 10 and section busbars

Fuse Type	Cartridge Fuse
Current Rating	16 A
Voltage Rating	230 V
Time Characteristic	Fast Acting
Breaking Capacity	100 A
Body Material	Ceramic
Application	Domestic
Mounting Type	PCB Mount

Part No.: 31955000

AMBUS^®60Classic

busbar mounted fuse holder, with LED

for fuses 10x38 IEC 60269-2, with LED 110 - 690 V AC / DC

10 x 38 / 3P

for busbars 12, 15, 20, 25, 30 x 5, 10 and section busbars

Current Rating

250A

he CrossBoard from Wöhner, world market leader for busbar system technology and leading solution provider for the distribution and control of electrical power, has established itself and proven itself as a modular and open basic system since its market launch. Now the company is presenting a decisive upgrade – and is pushing the limit from 160 amps to 800 amps rated current: the new standard for the industry. 

Current Rating

300A

he CrossBoard from Wöhner, world market leader for busbar system technology and leading solution provider for the distribution and control of electrical power, has established itself and proven itself as a modular and open basic system since its market launch. Now the company is presenting a decisive upgrade – and is pushing the limit from 160 amps to 800 amps rated current: the new standard for the industry. 

Current Rating

250A

touch-safe protected busbar system up to 800 A
rear feedable
plug and play
completely pre-assembled and immediately ready for use

Current Rating

250A

touch-safe protected busbar system up to 800 A
rear feedable
plug and play
completely pre-assembled and immediately ready for use

Thickness	3 mm
Length	3m

Tin-plated Cu bars considerably reduce the effort of preparing the contact points.
The Cu busbars are effectively protected against aggressive media.

Usage/Application	Power Distribution
Length	3600mm
Size	W x H x D: 3600 x 30 x 40

Part No.: 01224000

double-T section busbar 500 mm²

length 3.60 m, tinned

Usage/Application	Power Distribution
Length	3600mm
Size	W x H x D: 3600 x 30 x 40

Part No.: 01190000

double-T section busbar 720 mm²

length 3.60 m, tinned System

60Classic, centre feed unit

Usage/Application	Power Distribution
Length	3600mm
Size	W x H x D: 3600 x 30 x 10

Part No.: 01204000

busbar 30 x 10

length 3.60 m, tinned

System

60Classic

Usage/Application	Power Distribution
Length	2400mm
Size	W x H x D: 2400 x 30 x 40

Part No.: 01609000

double-T section busbar 500 mm²

length 2.40 m, tinned

System

60Classic, centre feed unit