Packaging Size	20 Kg
Brand	MYK Latricate
Model Number	DWA 215
Packaging Type	Bucket
Form	Paste
Strength	High

DWA 215 ® is a modified Polyurethane Adhesive designed for the installation of glass mosaic tile, ceramic tile, vitrified tile and natural stone on most drywall boards and clean dry cement based surfaces. DWA 215® is a factory made pail consisting of pre-blended single component adhesive which is ready to use.

Feature:

• Single component / Ready to use
• High bond strength
• No on-site mixing
• Fast installation – Saves time
• Economical
• Can be used on various dry wall boards

How to Apply: Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to insure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive. Areas of Application For commercial and residential installations of ceramic tile, vitrified tile and natural stone over most drywall boards and clean cement based surfaces. Used where installations must resist physical abuse, shock, and mild chemicals. (Interior & Exterior)   Suitable Substrates

• Concrete
• Cement Mortar Beds
• Plywood
• Gypsum wall board
• Calcium silicate board
• Bison panel board

Packaging Size	20 Kg
Brand	Asian Paints
Model Number	Smartcare
Packaging Type	Bag
Form	Powder
Strength	High
Color	Grey
Open Time	10 min
Curing Time	24 Hour
Mix density	1.85
. Pot Life	3 Hour
Cleaning tool	With Water Immediately After Use

A sturdy adhesive for fixing both interior and exterior tiles and walls. Tile Adhesive for Normal Application has a long pot life and does not require water curing or pre-soaking of tiles. This single component tile adhesive comes as a ready-to-use mixture consisting of cement, sand and special additives, making its application extremely easy.

Single component, ready-to-use mixture consisting of cement, sand and special additives.

Excellent adhesion and slip resistance.

Low water absorption makes it water resistant and minimizes shrinkage cracks.

Trafficable (ready for use) in 24 hours.


Features:

Kindly refer to the MSDS for Asian Paints SmartCare Tile Adhesive for Normal Application which gives detailed information on safety measures while handling the material. Store the bag tightly closed in a cool, dry place Keep out of reach of children and away from eatables.
May be harmful if swallowed. In case of ingestion seek immediate medical attention. Wear eye protection during application. In case of contact with eyes, rinse immediately with plenty of water and if required seek medical advice. It is recommended to wear suitable nose pad during surface preparation, mixing, application to avoid dust inhalation.