X

Vimal Enterprise

Mumbai, Maharashtra

| GST  27AFQPD2543C1ZQ

is a VERIFIED member of IndiaMART

Following details of the company have been verified

IndiaMART InterMESH Ltd.

6th floor, Tower 2, Assotech Business Cresterra, Plot No.22, Sec 135, Noida-201305, Uttar Pradesh, India.

  • 096-9696-9696
  • customercare@indiamart.com

| Verified Supplier

View Mobile Number

Laboratory Incubator

Authorized Wholesale Dealer of a wide range of products which include BOD Incubator, Laboratory Bacteriological Incubator, B.O.D Incubator, Bacteriological Incubator, Hot Air Oven And Incubator and Dry Bath Incubator.

BOD Incubator
Interested in this product?
Get Best Quote

BOD Incubator

Rs 1.05 Lakhs / Piece(s) OnwardsGet Latest Price

This Lab BOD Incubator, GMP Model is made under GMP guidelines & as per GMP Rules used for all pharmaceutical Co & Microbiology Dept etc.

Technical Specifications:

  • Double walled construction outer S.S304 dull Finish Inner S.S316 Mirror polished
  • PUF insulation between two walled
  • Full acrylic door permit inspection of specimens without disturbing the temp
  • Temp Controlled by PID Controller with auto tuning facility with accuracy of ±0.5 C .temp Range 5 C to 60 C accuracy ±0.5 C
  • Illumination light are provided for viewing
  • CFC free hermetically sealed compressor provide temp for below ambient condition
  • Air circulation fan for marinating temp uniformity through out the chamber
  • The chamber is provided with modular removable shelves made of S. S. for complete flexibility in use.
  • To work on 230 volts 50 H2

Validation Protocols : IQ OQ & PQ Documentation with calibration & Tradability certificate of controller


Safety Care : Built in temp deviation audio visual alarm. Safety thermostat for over shoot temp. Cut off system HRC fuses for compressor heater & main, time delay circuit for safety of compressor.

View Complete Details

Yes, I am interested!

Laboratory Bacteriological Incubator
Interested in this product?
Get Best Quote

Laboratory Bacteriological Incubator

Rs 12,000 / Piece(s) OnwardsGet Latest Price

Our range of Laboratory Bacteriological Incubators are available in different size from 35 Liters to 1000 Liters. These laboratory bacteriological incubators are based on latest Technology & are available in compact sizes. We used High grade M.S. Sheet & S. S. sheet for the manufacturing Process Ensuring Optimum Efficiency & Performance Level.

Technical Specifications:

  • Incubators are Sturdy Double walled Unit
  • Inner chamber made of S.S.304 & outer chamber made of M. S. powder coated
  • Gap between the two walled filled with glass wool insulation to avoid heat loses
  • Heating element is made of high grade chrome plate nichrome wire
  • Temp is controlled by thermostat
  • Temp. Range 5 C above ambient 60 C accuracy ± 2 C
  • Air Ventilation is provided on the top of the unit to remove the hot gases/Fumes
  • In lab type incubator heaters are placed in the bottom side of the Unit
  • All the control switches & Pilot lamps are fitted on the front panel
  • Tray should be supplied with G.I. ware Mesh

Optional Accessories:

  • Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5C
  • Air circulation Fan for Uniform Temp
  • Digital Timer
  • S. S. Wire mesh jail

View Complete Details

Yes, I am interested!

B.O.D Incubator
Interested in this product?
Get Best Quote

B.O.D Incubator

Rs 55,000 / Unit(s)Get Latest Price

Minimum Order Quantity: 1 Unit(s)

With sincerity and hard work of our experts, we have carved a niche for ourselves in this domain by offering B.O.D Incubator. The offered incubator is designed especially for biological oxygen demand determination & other applications like general incubators, Serum studies & Enzyme assays test. The provided incubator is manufactured using superior quality components and advanced technology in tandem with set industry standards. In order to ensure the robustness, this incubator is stringently tested against practical parameters by our experts.

Features:

  • Double walled cabinet mounted on castor wheels
  • Full Length inner acrylic door permit inspection of specimens without disturbing the temp.
  • Flush fitting insulated double walled door


Technical Specifications:

  • Double walled cabinet mounted on castor wheels
  • Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated
  • Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp
  • Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch
  • CFC Free hermetically sealed compressor provide temp. For below ambient condition
  • Air circulation fan for maintain Temp. Uniformity through out the chamber
  • Flush fitting insulated double walled door
  • The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use
  • To work on 230 volts 50 H2

View Complete Details

Yes, I am interested!

Bacteriological Incubator
Interested in this product?
Get Best Quote

Bacteriological Incubator

Rs 12,000 / Piece(s) OnwardsGet Latest Price

We have gained recognition as an eminent enterprise, devotedly engaged in offering a broad range of Bacteriological Incubator GMP. Using quality approved components with the assistance of modern techniques; this incubator is manufactured under the strict guidance of adroit workforce at our well-established production unit. This incubator is used in all pharmaceutical co. and microbiology Dept. In addition to this, we provide this incubator in various specifications to fulfill the varied requirements of our clients.

Features:

  • Forced air circulation system with fan for better uniformity of temp.
  • PID controller with auto tuning facility with double display to view set and current temp
  • Control Switch and pilot lamp are fitted on front panel

Other Details:

  • Triple walled construction
  • Inner made of S.S.316 mirror polished
  • Outer made of S.S.304 Dull finish
  • Gap between the two walled filled with glass wool insulation of 65 mm
  • Heating Element is made of S. S. ‘U’ type tubular nichrome wire with S.S. Sheathing
  • Heaters are placed at the right & left side of the inner chamber
  • PID Controller with auto tuning facility with double display to view set & current temp
  • Temp. Range 5 C above ambient to 60 C with accuracy of ± 0.5 C.
  • Silicon rubber gasket fitted on door to prevent lost of heat
  • Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali

Specifications:

a)

Forced air circulation system with fan for better uniformity of temp.

b)

Electronic digital timer range 0 to 999 min.

c)

Rs.232 interface with software for pc connection up to 8 channel

d)

Data logging with printing arrangement up to 8 channel

e)

Rs.485 for multiple units operating



Additional Information:

  • Item Code: VE-8
  • Pay Mode Terms: T/T (Bank Transfer)

View Complete Details

Yes, I am interested!

Bacteriological Incubator
Interested in this product?
Get Best Quote

Bacteriological Incubator

Rs 12,000 / Piece(s)Get Latest Price

Our company has specialized in the sphere of fabricating a wide range of Bacteriological Incubator that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubator as per the requirement of Clients.

    Technical
    Specifications:

    • Triple walled Unit
    • Inner chamber made of S.S.304
    • Outer chamber of Mild Steel with Powder coating
    • Gap Between the two walls filled with glass wool insulation to avoid heat loses of 65 mm
    • Heating element Are Made of high grade chrome plated nichrome wire
    • Heaters are placed ate the right & left side of the inner chamber
    • Enable with thermostat control the Temperature Temp. Range 5 C above ambient to 60 C accuracy ±2 C
    • Air Ventilation is placed on top of both sides to remove heat gases and fumes
    • Control Switch & pilot lamps are fitted on front panel
    • Supplied with G.I. Wire mesh Jali

    View Complete Details

    Yes, I am interested!

    Hot Air Oven And Incubator
    Interested in this product?
    Get Best Quote

    Hot Air Oven And Incubator

    Rs 5,200 / PieceGet Latest Price

    Consists of two chambers-upper and lower chambers. The lower chamber works as an incubator where as the upper chamber works as an oven. Chamber made of Polished 304 grade Stainless Steel Sheet. Exterior fabricated out of thick milled steel sheet duly finished in white stoving enamel/powder coated paint with mat finished colour combinations. Kanthal wire heating elements provided on three sides to attain quick and uniform heating in range of 150°C to 200° C ± 2° C, controlled by capillary type thermostat. L-shaped thermometer is built-in type. Control panel is provided with selector switch of high or low rates of power thermostat control Knob and indicators for mains & thermostat. Supplied with cord and plug. The equipment is suitable to operate on 220 VAC 50 Hz single phase.

    View Complete Details

    Yes, I am interested!

    Dry Bath Incubator
    Interested in this product?
    Get Best Quote

    Dry Bath Incubator

    Rs 8,000 / Piece(s)Get Latest Price

    Minimum Order Quantity: 1 Piece(s)

    Dry Bath Incubator offered comprises microprocessor-controlled product and comes backed by semiconductor refrigeration technology.


    Features:

     

    • Small volume and light weight finish
    • Allows for high usage convenience

     

    Specifications:

     

    • Model comes with PCR thermal cover technology with evaporation prevention function
    • Allows simultaneous display of set and actual time, temperature
    • Comes with built-in temperature calibration function
    • Automatic fault detection and buzzer alarm function
    • 24V DC power supply input
    • Having built-in over-temperature protection device for safe and stable working
    • Allows easy cleaning and disinfection

    View Complete Details

    Yes, I am interested!

    Hybridization Incubator
    Interested in this product?
    Get Best Quote

    Hybridization Incubator

    Rs 1.25 Lakhs / PieceGet Latest Price

    Minimum Order Quantity: 1 Piece

    Inside made of stainless steel. Temperature Range is above ambient 5° C to 90° C. The chamber has Air circulating fan to ensure uniformity of temp. A carrier to hold bottles (6 number of 60 mm DIA. x 200 mm Depth) can be easily placed on front of rotator mechanism. Any bottle can be taken out easily from the carrier.The carrier rotates with bottles parallel to the door at a variable speed. Viewing glass window in the specimen inside the chamber. Complete with microprocessor PID digital temp. Indicator-cum-controller with Pt 100 sensor.

     

    Inside made of stainless steel. Temperature Range is above ambient 5° C to 90° C. The chamber has Air circulating fan to ensure uniformity of temp. A carrier to hold bottles (6 number of 60 mm DIA. x 200 mm Depth) can be easily placed on front of rotator mechanism. Any bottle can be taken out easily from the carrier.The carrier rotates with bottles parallel to the door at a variable speed. Viewing glass window in the specimen inside the chamber. Complete with microprocessor PID digital temp. Indicator-cum-controller with Pt 100 sensor.

    View Complete Details

    Yes, I am interested!
    © Vimal Enterprise. All Rights Reserved (Terms of Use)