Reverse Osmosis Plant
| Capacity | 5000 LPH |
| RO Capacity | 5000LPH |
| Material Grade | SS 304 |
| Material | Stainless Steel |
| Automation Grade | Automatic |
| Plant Application | Industrial |
| Number of Membranes | 6 |
| Usage/Application | Industrial |
| Type Of Purification Plants | Reverse Osmosis |
| Purification Type | RO |
| Purification Stages | RO Membrane |
| High Pressure Pump | 2 HP |
| Warranty | 1 Year |
| Voltage | 415V |
| Frequency | 50Hz |
| Phase | Three Phase |
-
Raw Water Pre-Treatment:
-
Sediment filter: Removes sand, silt, and large particles.
-
Activated carbon filter: Removes chlorine, color, odor, and organics that can damage RO membranes.
-
Water softener or anti-scalant dosing (optional): Reduces scaling on membranes for hard water.
-
-
High-Pressure Pumping:
-
Raw water is pressurized to the operating pressure required by RO membranes (usually 10–15 bar for brackish water).
-
-
RO Membrane Stage:
-
Semi-permeable membranes allow water molecules to pass while rejecting dissolved salts and contaminants.
-
Clean water (permeate) is collected; rejected water (concentrate or brine) is discharged.
-
-
Post-Treatment (Optional):
-
pH balancing, UV sterilization, mineral addition, or storage in a tank for safe consumption.
-
View Complete Details
| Capacity | 250 LPH |
| RO Capacity | 250LPH |
| Plant Application | Industrial |
| Automation Grade | Semi-Automatic |
| Max. Input Water TDS | Up to 2000 PPM |
| Usage/Application | Industrial |
| Type Of Purification Plants | Reverse Osmosis |
| Purification Type | RO |
| Number of Membranes | 2 |
| Pump Power (High Pressure Pump) | 2 HP |
| Number Of Membranes In Ro | 2 |
| Purification Stages | RO Membrane |
| Membrane Size | 4040 |
| Voltage | 415V |
| Frequency | 50Hz |
| Material of Construction | Stainless Steel |
| Material | FRP |
-
Raw Water Pre-Treatment:
-
Sediment filter: Removes sand, silt, and large particles.
-
Activated carbon filter: Removes chlorine, color, odor, and organics that can damage RO membranes.
-
Water softener or anti-scalant dosing (optional): Reduces scaling on membranes for hard water.
-
-
High-Pressure Pumping:
-
Raw water is pressurized to the operating pressure required by RO membranes (usually 10–15 bar for brackish water).
-
-
RO Membrane Stage:
-
Semi-permeable membranes allow water molecules to pass while rejecting dissolved salts and contaminants.
-
Clean water (permeate) is collected; rejected water (concentrate or brine) is discharged.
-
View Complete Details
RO Water Treatment Plant
₹ 1,50,000/PieceGet Latest Price
| Purification Capacity | 1000 LPH |
| Capacity | 1000 LPH |
| Plant Application | Commercial |
| Automation Grade | Semi-Automatic |
| Material | Stainless Steel |
| Material Of Construction | Stainless Steel (SS) |
| Water Source | Borewell Water |
| Pump Type | Centrifugal Pump |
| Water Recovery Rate | 50-65% |
| Number of Membranes | 4 |
| Pump Power | 3 HP |
A Reverse Osmosis (RO) Water Treatment Plant is a water purification system that uses the reverse osmosis process to remove dissolved salts, impurities, microbes, and contaminants from raw water (from borewells, rivers, municipal sources, or brackish water) to produce clean, safe, low‑TDS water for drinking, industrial and commercial use
View Complete Details
- Developed and Managed by IndiaMART InterMESH Limited
