Wallmaax Paints Private Limited

Wallmaax M.H Distemper is a water based paint for interior surfaces which possesses high hiding power and gives the walls an emulsion finish.

 

Emulsion Finish

High Hiding Capacity

Composition

Pigments     :     Titanium Dioxide, High Performance Additives, High Quality Mineral Extenders
Binder     :     Styrene Acrylic
Dilution     :     20-30% by volume with clean potable water.

Properties

Colours     :     Brilliant White & Base
Texture     :     Rich Matt Finish
Touch dry     :     30 Minutes
Hard dry     :     8 hrs.
Washability     :     2 Weeks
Recoating Time     :     2-3 hrs.
Coverage     :     50-70 sqft / Kg. in 2 coats.
(Coverage is depend on the substrate condition.)
Application Method     :     Brushing ,Rolling & Spraying.
Pack Size     :     1 Kg, 2 Kg, 5 Kg, 10 Kg & 20 Kg


Application System

• Keep surface clean and dry. Remove dust, dirt, grease and any flaking paint from the surface and sand to smooth. Ensure there is no algae or moisture on the wall.
• Algae or fungus on walls to be removed by high pressure wash or coir brush and to be treated with anti-fungal solution
• Apply one coat of Wallmaax Interior Cement Primer, allow it to dry for 6-8 hrs and then apply 2-3 coats of Wallmaax emulsioned in a duration of 4-6 hrs.

Color

Brilliant White

Wallmaax Floorex is a premium blended PU based special emulsion paint to protect and beautify your exterior floor tiles. It is suitable for the cement tiles fixed to driveways, walk ways, terrace and for any plain cement surface. It protects your exterior floor tiles from sun, rain and algae and fungal attack and gives your tiles a superior glossy finish.

Scratch Resistant

Glossy Finish

Water and Fungal Resistant

Composition

Pigments Titanium Dioxide High Performance Additives, High Quality Mineral Extenders
Binder Styrene Acrylic
Dilution 20-30% by volume with clean potable water


Properties

Colours Brilliant White & Base
Texture Rich Matt Finish
Touch dry 30 Minutes
Hard dry 8 hrs.
Washability 2 Weeks.
Recoating Time 2 3 hrs
Coverage 50-70 sqft / kg in 2 coats.
(Coverage depends on the substrate condition)
Application Method Brushing, Rolling or Spraying
Pack Size 1 Kg, 2 Kg, 5 Kg, 10 Kg & 20 Kg


Application System

• Wash the surface vigorously with water jet to remove all foreign materials.
• Scrape off old paints.
• Do patching using cement, sand mixture.
• Allow to dry.
• Apply Wallmaax Floorex by any of the following methods. Brush, spray and sponge. Under normal conditions no thinning is required. In case thinning is required, a maximum quantity of 10% of pure water can be added.
• Single coat is normally sufficient where there is no color change.
• If there is a color change, apply second coat giving an interval of minimum 2 hrs per coat.

Wallmaax Saltex is a super premium acrylic based cement primer for your interior and exterior walls. It protects the flaking of your emulsion paint from the walls by preventing the salt and other offences penetrating through the mortar and bricks of the walls.

 

Withstand Marine Environs

Prevent Flaking


Composition

Pigments     :     Titanium Dioxide, High Performance Additives, High Quality Mineral Extenders
Binder     :     Pure Acrylic
Dilution     :     20-30% by volume with clean potable water.


Properties

Colours     :     Brilliant White & Base
Texture     :     Matt Finish
Touch dry     :     30 Minutes
Hard dry     :     8 hrs.
Washability     :     2 Weeks
Recoating Time     :     2-3 hrs.
Coverage     :     50-70 sqft / Ltr. in 2 coats.
(Coverage is depend on the substrate condition.)
Application Method     :     Brushing ,Rolling & Spraying.
Pack Size     :     1 Ltr, 2 Ltr, 5 Ltr, 10 Ltr & 20 Ltr


Application System

• Keep surface clean and dry. Remove dust, dirt, grease and any flaking paint from the surface and sand to smooth. Ensure there is no algae or moisture on the wall.
• Algae or fungus on walls to be removed by high pressure wash or coir brush and to be treated with anti-fungal solution
• Apply 2-3 coats of Wallmaax Saltex in a duration of 4-6 hrs.
• Apply 2-3 coats of premium range of topcoat emulsion very soon.

Color

Brilliant White

It's an integral liquid waterproofing admixture for concrete and cement mortar. It has good plasticising properties, make concrete cohesive and prevents segregation. The liquid is to be added to wet concrete or mortar. It fills up the capillaries in the concrete giving effective waterproofing.

 

Advanced Water Repellent system

Composition

Pigments     :     Titanium Rutile, High Performance Additives, High Quality Mineral Extenders
Binder     :     Cross link Polymer
Dilution     :     10-20% by volume with clean potable water.


Properties

Colours     :     Brilliant White & 1500 shades
Texture     :     Sheen Finish
Touch dry     :     30 Minutes
Hard dry     :     8 hrs.
Washability     :     2 Weeks
Recoating Time     :     4-6 hrs.
Coverage     :     40-50 sqft / Ltr. in 2 coats.
Pack Size     :     1 Ltr, 4 Ltr, 10 Ltr & 20 Ltr


Application System

• Keep surface clean and dry. Remove dust, dirt, grease and any flaking paint from the surface and sand to smooth. Ensure there is no algae or moisture on the wall.
• Leakproof is a polymer emulsion for water proofing purpose in terraces. Clean the surface thoroughly and fill the crack, if any, with crack filler and apply two coats of Wallmaax Cement Primer exterior then apply one coat of Leak Proof vertically and allow it to dry for 4-5 hrs. Then apply the second coat horizontally.