Worldwide Technologies

SentryHound-Pro™ Ferromagnetic Security Screener is a single pole (add a 2nd pole for complete walk through) solution to detect unauthorized or illegal cell phones, tablets, laptops, smartwatches, wearables and even weapons including guns, knives and makeshift shivs and shanks. Setup is simple and can be done anywhere; plug and play out of the box with less than 30 seconds from powering up to full operation. No software or assembly required. This allows rapid, non-invasive inspection of pockets, bags, purses, clothing and even body cavities.

Use a single pole for impromptu checkpoints, doorways and wall mounted ferromagnetic detection zones.

Use dual pole configuration (wirelessly tethered) to minimize false triggers and expand detection range over 5 feet wide.

• Single pole setup anywhere in under 30 seconds
• Lightweight, versatile & all day battery power
• Sealed against the elements for rugged indoor/outdoor use
• Add a 2nd pole for double duty or double detection range
• Full ferromagnetic non-invasive inspection zone up to 64″ wide by 75″ high (two pole configuration)
• Vastly reduced false detection compared to standard metal detectors
• Detects contraband cell phones (ON or OFF), smartwatches, tablets, knives, guns, razors, etc.
• Key lockable for security reassurance
• Most advanced ferromagnetic contraband screener available with distinct ferromagnetic detection zones to pinpoint contraband
• Advanced motion detection and false trigger rejection using dual pole configuration
• Perfect for FBoP, DoD, NSA, FBI & any secure government or military SCIF
• Designed and manufactured entirely in the U.S.A.

Additional Information:

• Production Capacity: 50
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box

Additional Information:

• Production Capacity: 50
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box

Additional Information:

• Production Capacity: 50
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard box

Applications'H' Indicator shall be provided for day and night operation for signal showing the correct landing direction of runways. Its lights shall be arranged in rows to form the refer 'H' illuminated rows of the indicator viewed from above in the landing direction shall form the letter 'T' as lights on one parallel limbs are switched on along with those of the central limb. Our Landing 'T' confirm to FAA and ICAO specification.SpecificationsAluminum LM-6 Grade with powder coatedAviation Yellow powder coatedPolycarbonate U.V stabilized optical grade suitable for outdoor sunlight exposure.Glass epoxy FR-4 grade with UVLO-94 tested at sourceIntegrated with main lens to avoid bird menaceIP- 65 (total dust and waterproof in accordance)1Kg / 1.3kg1" Self threaded hub at the bottomHigh intensity UV stabilized outdoor application LEDsWHITE or YELLOW color with CIE Chromaticity chart standards and required wave lengthAs per ICAO Aerodrome standards-aerodrome designEPDM gasket treated for all weather. anti cracking and ozone resistantStainless steel1,00,000 burning hours90 - 260V AC. 50/60Hz10 Watts Max at rated voltageShort circuit / Surge I EMI Class-II filter / Meets Blue Angel requirement in sleep modeWireless modular LED Light Engine module construction to comply vibration proof system-10 degree to +55 degree Ref IS 9000 art3/sec5500X10 Meg. Ohms1 KV for 1 minute

DESIGNED FOR:

Detection of mines and explosive device with electronic fuses (activation system) concealed on the ground surface, slightly in the ground (snow), under the road pavement and within various facilities.

Detects:

• communicational transmitters & receivers as well as alarm and remote control system facilities;

• electronic and electromechanical timers;

• acoustic, magnetic, optoelectronic sensors and midget TV cameras;

• built-in metal-ware  as well as hidden machinery and appliances;

• domestic electronic units and alpine skiing in snow traps.

APPLICATION:

• roads, terrain and objects inspection for mines, improvised explosive devices (IED) and other explosive appliances with electronic components

• searching for hidden caches with weapons, ammunition, explosive devices and communication facilities

• questioned items investigation, searching  for subversive and terrorist devices and arrangements

ADVANTAGES:

√ extended detection range

√ electronic facilities localization in any operational mode: active, ‘stand-by’ or even switched off  installed behind walls, fences, etc.

√ equipment design allows its usage in tactical airborne missions

√ efficient use in search/reconnaissance missions

√ high searching rate

√ safe to handle, user-friendly design

√ extended continuous operational time without battery replacement

√  long-term operation facility in field conditions

Application

• For detection of antipersonnel & antitank mines that contain metallic components; on the ground surface or embedded in soil, snow, brickwork or even shallow water.
• For mobile squad and combat vehicle crew supply.

Main Features:

• High sensitivity.
• Small dimensions in a ready for transportation mode.
• Underwater operation facility down to 30m depth.

• OPERATING RANGE OF up to 2 KILOMETERS || Dual Brightness Modes: SUPER STRONG - STRONG || Super Bright LED offering very high Lumens of brightness
• High Strength but Light Weight, Water-Resistant ABS Body || Big Parabolic Reflector for maximum light reflection || Dual Swivel Stand for ground placement at multiple light angles || Adjustable Shoulder Strap for easy carry
• 7.4V, 5200 mAh Lithium-ion Battery || Up to 9 hours of battery back-up on Standard Brightness mode
• Dual Charging: AC/DC Wall Charger or 12V DC Car Plug Charger (both included)

Specifications

Height

SentryHound-Pro™ Ferromagnetic Contraband Portal is a dual pole (also works as a single pole) solution to detect unauthorized or illegal PEDs (Personal Electronic Devices) including cell phones, tablets, laptops, smartwatches, wearables and even weapons including guns and knives. SentryHound-Pro’s ferromagnetic inspection zones are highly sensitive to trace amounts of ferrous material found in plastic cell phones and miniaturized electronics. These same cell phones slip through regular metal detection but not SentryHound-Pro because of its sensitivity, unique motion detection and enhanced false trigger rejection. This allows for a rapid security checkpoint of pockets, bags, purses, clothing and even body cavities.

• Ferromagnetic Contraband Portal (2 poles included) for the quickest & most accurate ferromagnetic inspection security checkpoint
• Detects contraband PEDs including cell phones (ON or OFF), smartwatches, wearables, tablets, portable electronics, weapons
• Vastly reduced false detection compared to standard metal detectors
• 2nd pole easily untethered to use for additional security checkpoint
• Ideal for FBoP, DoD, NSA, FBI & any secure government or military SCIF and manufactured entirely in the U.S.A.

Use a single pole for impromptu checkpoints, doorways and wall mounted ferromagnetic inspection zones.

Use dual pole configuration (wirelessly tethered) to minimize false triggers and expand detection range over 5 feet wide.

Setup is simple and can be done anywhere – Plug and play out of the box with less than 30 seconds from powering up to full operation. No software or assembly required. SentryHound-Pro ferromagnetic contraband portal is lightweight (only 17 pounds per pole) so it can be easily transported and deployed by any security personnel instantly. Unlike most walk-through or gated metal detection systems, SentryHound-Pro detects full head-to-toe (75 inches) with light-up zones to pinpoint the area or zone of interest. The domed, omnidirectional alert is highly visible and the audible alert can be easily adjusted for maximum effect. SentryHound-Pro Ferromagnetic Contraband Portal is fully sealed against the elements for rugged indoor and outdoor use. It contains a sealed gel cell internal rechargeable battery for a full day of continuous power anywhere if needed. SentryHound-Pro also features security key lock and dry trigger contacts for alarms, DVRs, video surveillance and intrusion detection systems

Features

• Ferromagnetic Contraband Portal (2 poles included) for the quickest & most accurate ferromagnetic inspection security checkpoint
• Single pole setup anywhere in under 30 seconds
• Lightweight, versatile & all day battery power
• Sealed against the elements for rugged indoor/outdoor use
• 2nd pole easily untethered to use for additional security checkpoint
• Vastly reduced false detection compared to standard metal detectors
• Full ferromagnetic security checkpoint zone up to 64″ wide by 75″ high
• Detects contraband cell phones (ON or OFF), smartwatches, wearables, tablets, portable electronics, weapons
• Key lockable for security reassurance
• Most advanced ferromagnetic contraband portal available with distinct ferromagnetic inspection zones to pinpoint contraband
• Advanced motion detection and false trigger rejection using dual pole configuration
• Perfect for FBoP, DoD, NSA, FBI & any secure government or military SCIF
• Designed and manufactured entirely in the U.S.A.

GENERAL PURPOSE:

Detection of various timing devices: mechanical, electromechanical, electronic, as well as other electronic devices and gears by their electric, magnetic, acoustic and vibrating emissions.

Detects:

• electromechanical timing devices at an up to 40cm range

• electronic timing devices at an up to 10cm range

• radio signal receivers at an up to 15cm range

 APPLICATION:

• questioned items inspection – RC IED or explosive devices with clock retarders

• searching for persons hidden in shelters

• aircraft inspection

ADVANTAGES:

√ compact, easy-to-handle design

√ high sensitivity

√ safe in use

√ can be used in places where active radio-electronic equipment is not permitted

4.3 Inch Monitor

Carbon Fiber Pole

Control Handle

Video / Audio Recording and Image Capture

Zoom Function (x 10 levels)

Waterproof IP64 Compliant

Total Length: 3 Meter (Can be extended with optional poles)

8 GB SD Card, SD Card Reader, Battery, Charger, Earphone, Carry Case Included

GENERAL PURPOSE:
searching for various electronic devices that contains semi-conductor components 
APPLICATION:
• mobile phone & SIM card detection
• electronic components of remote control improvised explosive device (RC IED) investigation in urban environment under strong interference condition 
• eavesdropping device and other unauthorized electronic appliance detection and localization 
ADVANTAGES: 
√ affective radiated power (ERP) not less than 700W
√ precise target space localization along with  high operational efficiency
√ detects RC IED at the same distance as the ‘Eagle EK’ field NLJD does, resistant to a strong interference condition of urban areas
√ radio-electronic device detection behind reinforcing building structure
√ assured small target detection in various medium including that with high humidity
√ single-block (‘bullpup’ type) design: no connectors or cables, antenna fixed on adjustable telescopic bar, lighting of inspected zone, efficient both for premises and terrain

Area of application

 √ Detection of prohibited electronic devices (including voice recorders, mobile telephones, SIM-cards, digital memory devices), as well as fire weapon. 

 √ Detection of improvised explosive devices (IED electronic control systems) in cabin baggage and on the “operator’s” body on the background of complex industrial disturbance from the town development.

√ Detection of electronic devices for secret information retrieval.

Features:

 √ Absolute safety (sanitary and hygienic certificate).

√ Confident detection of ultraminiaturized electronic targets, problematic for detection by metal detectors.    

√ Confident detection of small-sized targets in a wide range of embedding environments (including wet environments).

√ Precise spatial discrimination at high search efficiency.

√ Single block, no detachable connections and cables.

The device allows detecting:

• SIM (UIM) card – up to 0,5 m.
• Mobile telephone – up to 1 m.

DescriptionMaximum performance, minimal size. The compact EVO5 is packed with the right technology to make it simple to use during a search. Both everyday and occasional users will love this device. The EVO5, the latest arrival in our line of transceivers, capitalizes on our 30-year expertise to fit in the palm of your hand.Our R&D team pushed the size/performance ratio past the edge of the envelope to create a device that fits perfectly in your snow pants' pocket. With a 50m search strip width, group check, mark function, and an automatic revert-to-transmit mode, the EVO5 is jam packed with all of the essential functions needed to rescue an avalanche victim. Equipped with a backlit screen and a speaker that emits a precise, modulated beep, this transceiver will efficiently and effectively guide you to the burial zone.Note: Holster sold separatelyFeaturesDesign and ergonomicsThe design and ergonomics of the device were taken into account from the very beginning of the EVO5's development to make handling simple and intuitive. A 3 position slider, an extra large screen and a central marking button make it easy to operate the device during the search.50m search strip widthGROUP CHECK mode tests transmit frequency and powerMarking function to identify burial victims already locatedMultiple burial indicator displays a “+”when more than 3 victimsDigital signal processing guides rescuer more efficiently towards the burial zoneAuto-test lets the device run a diagnostic to verify that all main functionalities are working properlyBacklit screen provides great contrast in any conditions or lightingAutomatic revert-to-transmit mode via movement sensor in case of a secondary avalancheInterference management lets the user adjust their search technique in an area with a lot of signal interferenceU-Turn alarm lets the rescuer know they are heading in the wrong directionCompact minimalist device (111mm x 72mm x 20mm)Weight: 165g (including batteries)Antennas3 antennas to improve chances of finding a signal and for greater precision during the fine searchSmall but powerfulDespite its compact size, the latest addition to the WTPL range offers performance worthy of a great one. 50m of search bandwidth, marking function and interference management for smart phones and other electronic devices are available. The automatic return to emission in the event of an over avalanche also ensures an increased level of safety. The group-check and U-turn indication complete the functionalities to facilitate the use of the device.

Additional Information:

• Production Capacity: 100
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box

Description

Fleet management applies GPS tracking systems to trucks, trailers, delivery vans, and rental cars. By continuously checking up-to-date location information and identifying vehicles that deviate or disappear from planned routes or cross specific boundaries.

Car thieves uses signal jammar disconnecting the communication between truck and control center to steal expensive cars and lorries carrying valuable loads.

This device is made to take precautions against people using signal jammar to disable the Mobile and GPS connection of GPS tracking system. This device will issue alert (warning trigger) back to control center to notify the attempted theft / robbery, before the mobile connection of GPS tracking system is been blocked.

This device consists of 2 detectors:

1. Wideband signal jammar of cellphone, WiFi, GPS, etc.

2. Narrowband L1 and Wideband GPS jammar

Features

NOT INTERFERE WITH CELLPHONE / WIFI SIGNAL

This device will not have interfered with cellphone / WiFi / Bluetooth

signals, it will not cause any false alarm if someone uses a cellphone

nearby or install this device in an environment with WiFi, DETECT, phone or Bluetooth, etc. 

BACKGROUND NOISE FILTER

Most of the background noise or environment interference are below 500 MHz. To reduce the false alarm caused by background noise, this device has a unique filter to make it insensitive with the signal below 500 MHz.

WIDE ADAPTATION WITH WEATHER & ENVIRONMENTS

This device can stay stable in operation in a wider temperature range,and has good weather suitability during four seasons of shifting.

This device has extensive environmental adaptation and fewer false alarms.

DETECT SMALL CIGAR-TYPE GPS JAMMAR UP TO 15 METERS

This device has installed a new GPS jammar detection module with superior sensitivity to detect small cigar-type GPS jammar up to 15 meters.

8-LED SIGNAL STRENGTH INDICATION

The 8-LED bar will light up according to the signal strength from low to high, green yellow red, higher signal, more LED.

SENSITIVITY (DISTANCE) ADJUSTMENT

Factory default sensitivity can fit most of existing environment. The installer can adjust sensitivity tuner to eliminate environment noise if needed.

Detecting object

1. Wideband jammar of Cellphone, WiFi, GPS, etc.

2. Narrowband L1 and wideband GPS jammar

 Dimension       L 13 x W 6.8 x T 2.6 cm (not including antenna)

Weight            About 130g

Power 12V – 24V Dc, 150mA

Warning mode LED

Bandwidth Resolution  FULL band detection

Frequency scan timing

for jammar signal          Always detecting

Handling of jammar signal         Instant activate relay output after verified the jammar signal

Alarm output    1.0A relay, with NO-NC output

 Maximum Detecting distance    1.         Cigar plug type GPS jammar (30mW): about 15 meters

2.         High power GPS jammar (2W = 2000mW): about 35 meters

Additional Information:

• Production Capacity: 100
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box

Description

It is a satellite signaling device of last resort, for use when all other means of self rescue have been exhausted, where the situation is grave and imminent loss of life, limb, eyesight, or valuable property will occur without assistance.

Head offshore with confidence. With three levels of integrated signal technology — GPS positioning, a powerful 406 MHz signal and 121.5 MHz homing capability — the AquaLink quickly and accurately relays your position to a worldwide network of Search and Rescue satellites, reducing search time and increasing your chances of survival. It’s reliable signaling technology that has saved more than 26,800 lives since 1982.

It broadcasts a unique registered distress signal that not only tells rescuers where you are, but who you are. The onboard GPS can fix your position to within 100 meters and then utilizes a powerful 406 MHz signal to relay your distress call to orbiting satellites. As local Search and Rescue is deployed, a separate homing signal and integrated LED strobe light guide rescuers to your exact location.

It is small enough to be easily carried in a pack or pocket or can be worn on deck, at the helm, in quarters or on a life vest and will float if accidentally dropped overboard. Performing a full functional self test of the PLB’s internal circuitry, battery voltage & power, and 406 MHz transmission gives you peace of mind knowing your PLB will work the moment you need it most. Exclusive: Built-in GPS acquisition test mode allows you to test GPS functionality up to 12 times over the life of the battery.

Tap in to the same field-tested rescue technology used by the U.S. Military, U.S. Coast Guard, NATO Special Forces and Arctic explorers.

Features

No Subscription Fees
Floats
Super Bright LED Strobe
On Board 66 Channel GPS
Self-Test and GPS Test Features
Typical Performance 35 Hours
Non-Hazmat Battery

Specifications

Size2.3 x 5.8 x 1.45” (5.9 x 14.8 x 3.7 cm)Weight9.2 oz (261 g) with lanyardBattery, ClassClass 2 (non-hazmat) lithium batteriesBattery, Replacement IntervalReplacement due six (6) years from date of manufacture or after emergency useBattery, Operational LifeExceeds 24 Hours @ -4°F (-20°C)Battery, Typical Performance35 Hours @ -4°F (-20°C)Battery, Storage-40°F to + 158°F (-40°C to +70°C)MaterialEngineered polycarbonate blendColor(high visibility yellow)ActivationManualOperation2 steps: deploy antenna, press ON button. Give clear view of skyWaterproof16.40 ft (5 m) @ 1 hr., 33 ft (10 m) @ 10 min. Factory tested @ 70°F, exceeds RTCM waterproof requirementsRadiated Power6.3W (406 MHz), 50 mW +/-3dB (121.5 MHz)AccessoriesAttachment clip includedApprovalsCospas-Sarsat, FCC, Canada, R&TTE, New Zealand

Description

GARRETT Super Scanner V Hand-held metal detector with udible and silent vibrating alarm options and extended battery life.

Originally designed for use at the Olympic Games in 1984, Garrett's Super Scanner is the most recognized hand-held metal detector in the world.

Features

Ultimate sensitivity: detects medium sized pistol from 9" distance; large knife from 6"; razor blades and box cutters from 3" distance; foil-wrapped drugs and tiny jewelry from 1".

Self-calibrating: digital microprocessor technology eliminates the need for periodic sensitivity adjustments.

Rugged, high-impact ABS case with reinforced coil compartment. Exceeds Mil-Std-810F (drop test) Method 516.5, procedures II and IV.

Large 8" scan surface for quick, thorough scanning.

No tools required to change standard 9V battery (included). Optional rechargeable battery kit available.

Sharp audible alarm and bright red LED indicates the detection of metal.

Momentary push button helps temporarily eliminate detection of nearby ambient metal such as rebar, metal walls.

Three-color LED indication: Green LED indicates ON; Amber LED indicates LOW BATTERY: Red LED indicates ALARM.

Operating temperatures: -35° F (-37° C) to 158° F (70° C)

Specifications

Operating Temperatures -35º F (-37º C) to 158º F (70º C)

Humidity To 95% non condensing

Audio Frequency 2kHz Warble

Tuning Automatic

Indicators Speaker and LED Alert - Lights Green: Power ON, Amber: Battery LOW, Red: ALARM condition

Controls Power switch (Audible / Off / Silent)
Interference Elimination Momentary Switch
Battery
Single 9 volt battery provides up to 100 hours of normal operation. Optional NiMH rechargeable battery provides up to 45 hours on a  ingle charge.

Dimensions

Width: 3.25" (8.3 cm)

Thickness: 1.625" (4.13 cm)

Length: 16.5" (42 cm)
Weight: 17.6 oz (500 g)

• Superb strength
• Anti corrosive
• Flawless finish

• Product Description Characteristics:Sound amplification
• Illumination
• Alarm
• Radio & record
• Certificates: CE, FCC
• Patented product: Yes Specifications Dimensions (L x W x H): 210 x 132 x 195 mm
• Power: 8 x AA batteries
• Weight: 510G (Not including batteries)

• Sound amplification output: 5~10 Watts
• Material: reinforced ABS

• Color box dimensions (L x W x H): 232 x 140 x 220 mm
• 10 PCS/Carton
• Carton dimensions (L x W x H): 730x 490 x 250 mm

Description

This LCD hand-held x-ray screening inspection scanner is a new type of x-ray medical scanner and parcel & baggage scanner in the world. It is safe and no harm to human. We adopted MCP - X-Ray image strengthening technology, and it has high discrimination and high resolution capacities, this device can produce clear real-time images without darkroom. This scanner device's operation is very simple and easy. You will only make it connect to the power supply, then you will press the " START " button, it will begin to work, you will use it to scan your objects, then scanner' screen clearly displays suspicious images.

This scanner takes strict precautions and the operators don't need any protections and training, it conforms to ISO9001:2008 international quality control standard procedures.

Features

Medical inspection: it is widely used in pediatrics, dentistry, hospital orthopedic & foot surgery and other departments, and is widely used for the immediate diagnosis in the emergency ward and simple surgery, also used for diagnosis of childbearing age women and birth control ring inspection in hospitals and for the inspection of athletes.

Industrial inspection: especially, it applies to various field rescues, such as: industrial materials & apparatus quality inspection, harmless inspection to aluminum casting, alloy casting, electronic integration piece and high voltage bundle, and so on.

Security inspection: widely used in fieldworks, supermarkets, companies, private places, VIP places / meetings, government departments, security departments, armies, customs and mail departments to inspect small parcels, hand-held baggages, etc.. It can provide outstanding threat detection and can show the threat image projection.

Specifications

Output image size: (W) 100mm * (H) 75mm.

LCD display image, OPTIONAL: it can be connected to a computer or a monitor for watching.

Survey thickness: ≤ 320mm,

Ratio: ≥ 4%.

X-Ray tube voltage: 50 ~ 90KV continual adjustment.

Gray level: ≥ 10 level.

Voltage accuracy: ≤ ±1%. Current

accuracy: ≤ ±2%.

Releasing current: 1A.

Temperature: -10 ºC ~ 50 ºC.

Resistance maximum: 0.5.

Resolution: ≥ 40LP/cm.

Tube current: 0.2 ~ 0.5mA continual adjustment.

Main engine working frequency: 20 KHz.

Opposite humidity: ≤ 80%.

Power supply: 110V ~ 220V (±10%), 50 ~ 60Hz.

Power consumption: 80W.

Dimension: about: 550 (L) * 350 (W) * 200 (H) mm.

Weight: about 9.5Kg

Technical standards:
1. Conform to EN 60950-1:2006+A11:2009 product safety international standard. Conform to EN 61010-1:2001 product international safety standard. 2. Conform to EN55011:2009 product safety international standard, conform to EN61000-6-2:2005 product immunity international standard. 3. Conform to EN 60601-1:2006 medical device international safety standard. Conform to EN 60601-1-2:2007 medical device emission and immunity international safety standards.

Additional Information:

• Production Capacity: 50
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box

Specifications
 

Output Port

Frequency Bands

Average Output Power

CH1

420-470MHz

100W/50 dbm

CH2

825-940MHz

100W/50 dbm

CH3

1170-1280MHz

100W/50 dbm

CH4

1450-1550MHz

100W/50 dbm

CH5

1550-1650MHz

100W/50 dbm

CH6

2400-2500MHz

100W/50 dbm

CH7

5150-5300MHz

100W/50 dbm

CH8

5700-5900MHz

100W/50 dbm

Power Supply

AC 220V

Visual LED Indication

Yes

Working Time

24x7 Hours

Working Temperature

-20C to 70C

Host Weight

40 Kg

Host Size

480*450*420 mm

Directional Antenna

High Gain

Auto Detection Distance

Maximum 5 Km

Auto Jemming Distance

Maximum 5 Km

Omni Antennas

Optional

WTPL 4 Bands 110W Drone Deactivator Jammar UAV Blocker System
 
Description
Drones UAV Max 110W, 4 Bands,
DC 12V, Using Normal Car Battery or
AC 110V /220V Power Supplier
4 Bands in One Directional Antenna
Four Bands in One Directional Antenna
2.4-2.5GHz:20W
WiFi 11.g, b, Bluetooth (Vertical Polarization)2.4-2.5GHz:20WWiFi 11.g, b, Bluetooth (Horizontal Polarization)GPS L1 + GLONASS L1 Hz:40W1570-1620MHz5.7GHz-5.9GHz: 30.0WWiFi 11.aTotal : 110 W Option: Omni Antennas with Magnetic Bases
Cover Most Commercial Drones / UAVs
Like Dji Phantom 4, Phantom 3 Professional, Advanced, Standard series, Inspire Series...
Adjustable Output Power each Band/Channel, Max Output Power to 0 (OFF)
100% Safe VSWR over protection (Isolator) for each modular
Power Supply: DC 12V Normal Car Battery (Cable included) or AC Power Supplier
(AC220V/110V-DC12V 20Amp)
Range: Radius 1000~1500 Meters
Working Time: Without the time limit, May continue to work,
Dimension 390 x 340 x 130 mm (H × W × D)
Weight 14 Kg (approximately) just main unit not included antenna and all accessories
Operating temperature: -20 ~ +60

GENERAL PURPOSE:

 Improvised explosive devices (IED) detection via their control-wire-line survey.

APPLICATION:

• roads, terrain and objects inspection for mines, improvised explosive devices (IED) and other explosive appliances with electronic components

• searching for hidden cache with weapons, ammunition and explosive devices

• questioned items investigation, searching  for subversive and terrorist devices and arrangements

ADVANTAGES:

√ not very extended wire-line detection (RC IED cables:  from 20m and longer)

√ user-friendly design, the tool can be easily fitted to operator’s height, surface relief and  the height of vegetation

√ two operational modes: 

-       unknown wire-line detection 

-       the detected line tracing

√ audible indication

√ LED indication: 

-       signal level in wire-line searching mode

-       direction of deflection from the detected line trace

 √ power-source-state LED indication together with continuous voltage control

√ spaced generator and receiver modules operation facility

GENERAL PURPOSE:

• Monitoring of traffic routes, terrains, and facilities for detection of improvised explosive devices (IED electronic control systems) in the course of engineer reconnaissance
• Use as part of an engineer reconnaissance patrol

ADVANTAGES:

• Possibility of protecting an engineer reconnaissance patrol''''s crew with a broadband barrage jamming is provided
• Capable to disrupt the radio control channel of a detected IED
• The synchronous operation of IED detection and disruption means in a single portable device is implemented for the first time

The improvised explosive devices detection range is up to 30 m.

The objective of simultaneous operation of a radio-controlled explosive devices jammer and a nonlinear junction detector is achieved.

Technical parameters:

Application:

• Ferromagnetic objects detection, such as unexploded ordnance or other explosive objects in the ground, water or under water;
• Intended for terrain humanitarian demining as well as other special activity.

Features:

• Significant depth of unexploded ordnance detection;
• Possibility of detected ferromagnetic object location gridding;
• Can be used as a part of versattile integral system for ferromagnetic objects detection;
• Possibility of the Device profile adaptation for the real task requirements.

Equipment detection ability:

• Explosive device at the depths down to 7 meters.

Additional Information:

• Production Capacity: 100
• Delivery Time: 3-4 Weeks
• Packaging Details: Cardboard Box