Xpert Engineering

• Permanently flexible
• Non-sag consistency - Exceptionally thixotropic
• Non-sticky / does not pick up dirt
• No change in volume
• Easy to gun, can be easily smoothed
• Over-paintable

• Body construction of cars, containers, caravans etc.
• Sealing and bonding of ventilation ducts, gutters and spouts etc.
• Sealing of sheet metal seams
• For vibration reduction in all type of sheet metal assembly works
• Sealing against water, air, gas and dust.

Additional Information:

• Delivery Time: Exstock
• Packaging Details: 300ml Crt, 600ml Sausages, bulk pack as per request

Additional Information:

• Delivery Time: Exstock

Additional Information:

• Delivery Time: 2 Weeks

Additional Information:

• Item Code: Dowsil733

Akfix P636 is a one-component, medium-modulus polyurethane sealant that cures on exposure to atmospheric humidity and capable of enduring direct flame to certain degrees.

• Possesses permanent elasticity with high fire rating,
• 25 % movement capability,
• No surface tackiness after full cure,
• Do not pick up dirt,
• No shrinkage,
• Cures bubble-free,
• Enhanced storage stability,
• No sagging – Thixotropic,
• Can be applied with hand gun and tooled easily,
• Paintable.

• Fire rated sealing and bonding application between many different construction materials,
• Fire seal of movement and connection joints in floors,
• Joints between prefabricated construction materials
• Fire stop sealing and bonding of ventilation ducts, gutters and spouts for
• For expansion joints between pre-cast concrete panels

Akfix 807 is a single-component, moisture-curing and self-expanding PU foam especially developed forapplications at temperatures of as low as -6 °C.

• High yield&stability and adequate pressure at frost temperatures.
• Excellent adhesion on most materials.
• Very good filling capacity.
• High thermal&acoustical insulation value.
• Resistant to moisture, heat, water and many chemicals.

• Mounting and insulating of door and window frames. Filling and sealing of gaps, joints and cavities.Filling of penetrations in walls. Improving thermal isolation in cooling systems.

Akfix 807P is a single-component PU foam used with an applicator gun and developed for applications intemperatures down to -6 °C.

• Can be applied at frost temperatures.
• Excellent adhesion& filling capacity and high thermal&acoustical insulation value. Economical
• Consumption thanks to precise application.
• High yield up to 45 liters.
• Conforms to fire class B3 according to DIN 4102-1.
• Mould-proof, water-proof and over paintable.

• Fixing and insulating of door and window frames.
• Filling and sealing of gaps, joints and cavities.
• Filling of penetrations in walls.
• Insulating electrical outlets and water pipes

• More than 4 hours of fire resistance without using any backfilling materials in certain conditions
• M1 Fire Rating according to NF P 92-501 radiation test
• Good unprimed adhesion to most common construction substrates.
• Easy to apply
• Remains flexible
• Paintable
• Non-slump

• Sealing of joints and seams, or at certain areas where requirements for fire resistance are mandatory

• Wacker RTV Silicone Sealant
• Neutral Cure
• Color - Clr/Wht/Blk