X

Zydex Industries

Vadodara, Gujarat

| GST  24ABLPR6874K1ZW

| TrustSEAL Verified

View Mobile Number 73% Response Rate

Zydex Waterproofing Coatings

Manufacturer of a wide range of products which include Zydex ZycoPrime Plus Waterproofing Acylic Bonding Agent and Zydex Elastobar Acrylic Based Waterproofing Elastomeric Membrane.

Zydex ZycoPrime Plus Waterproofing Acylic Bonding Agent
  • Zydex ZycoPrime Plus Waterproofing Acylic Bonding Agent
  • Zydex ZycoPrime Plus Waterproofing Acylic Bonding Agent
  • Zydex ZycoPrime Plus Waterproofing Acylic Bonding Agent
Interested in this product?
Get Best Quote
CategoryCementitious Waterproofing
Packaging Size250 ml,1 ltr,5 ltr,20 ltr,35 ltr
TypeConcrete Admixture
Grade StandardIndustrial Grade
FormMilky White,Free flowing Liquid
Storage ConditionStore Between +5 Deg C and +45 Deg C.
Specific Gravity1.01 to 1.02
ViscosityLess than 500 cps@ 25 Deg C
Shelf Life4 years if stored as recommended
Ph Value6 to 7 @ 25 Deg C
BrandZydex
Solid Content35 +/- 1%
DiluentClean Potable Water TDS less than 1000 ppm
Flash PointNon Flammable

"ZycoPrime is an acrylic co-polymer emulsion supplied as a ready to use bonding agent with superior wet adhesion and universal compatibility. It is also a versatile latex that can be used as acement modifier for spalled concrete slabs, overhangs, beams, columns and floors. It is also used as a bonding primer and porosity filler with ZycoSil+ during waterproofing applications"

Features:

  • Multipurpose, UV stable & Economical
  • When used in concrete / plaster, it prevents cracking
  • It reduces drying and shrinkage cracks
  • Reduces permeability of water
  • Improves workability of concrete / plaster
  • Bonds strongly with concrete, plasters, cementitious surfaces
  • Reduces viscosity of cement-injection grout and tile adhesives for better fluidity & bonding"

Application Areas:
  • Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc.
  • Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc.
  • Waterproofing &/or Bonding Primer : Walls & slabs

Application Method:
Clean the surface with wire brush, scrubber or air blower to remove hidden dirt, loose particles, laitance & dust. De-grease the surface by using suitable solvents, if needed.

Bonding Primer: To be used as a clear bonding primer by diluting 1:5 with water. Apply on the walls before painting or during putty rendering.

Waterproofing Primer: For priming of concrete substrate, the surface should be thoroughly saturated with ZycoSil+ solution (Dilution Ratio - 1 part ZycoSil+ : 20 parts potable Water : 2 parts of ZycoPrime+).

Waterproofing Membrane: For a waterproofing coating mix 1 part ZycoPrime+ with 1 part of cement & 1 part of 100 mesh sand.
Add water for brushability.Brush apply the mix in span of 4-6 hours on the prepared concrete substrate. It is recommended to saturate the surface with ZycoSil+ solution prior to this application. Overlay the coating with a protective screed to the desired slope and thickness.Coverage : 4-5 m² for a 0.2 mm (200 microns) coat.

Coverage:
  1. Vertical Surfaces (Concrete, Brick & Stone) : Approx. 60-100m² (645-1075 ft²) per 2 litres of ZycoPrime+ diluted in a 21 litre solution of 1:20 ZycoSil+ solution in water.
  2. Horizontal Concrete Surfaces : Approx. 24-40m² (260-430 ft²) 2 litre of ZycoPrime+ diluted in a 21 litre solution of 1:20 ZycoSil+ solution in water.

View Complete Details

Yes, I am interested!

Zydex Elastobar Acrylic Based Waterproofing Elastomeric Membrane
Interested in this product?
Get Best Quote
Packaging Size250 g,1 kg,5 kg,20 kg
FormMilky White,Free flowing Liquid
BrandZydex
Specific Gravity1.02 +/- 0.01
Shelf Life2 years if stored as recommended
ViscosityLess than 500 cps
Elongation At Breakup to 250%
Ph Value7.5 to 8.5 @ 25 Deg C
Solid Content50 +/- 1%
DiluentClean Potable Water TDS less than 1000 ppm
Flash PointNon Flammable
Coverage18-20 Sq.ft. per 2 coats (Membrane coating with cement)
Storage ConditionStore between +5 Deg C and +45 Deg C.

Elastobar is a high performance elastomeric membrane for crack bridging. It features curing through crosslinking and is highly UV durable. It features ability to elongate upto 250 percent. It can be used on variety of substrates as a mortar mix with sand and cement.

Features:

  • High Elongation Elastomeric Waterproofing Membrane
  • Crosslinking & UV Durable
  • 250 Percent Elongation
  • Can be Used as a Mortar Mix with Sand and Cement

Application Areas:

  • Roof Terrace, Sunkens, Balconies & Utilities, Podiums, Water Tanks and STP (Sewage Treatment Plants), Basements, Retaining Walls, Water Reservoirs etc.

Application Method:

Surface Preparation
  • Clean the surface and remove all dust, foreign matters, loose material or any deposits of contamination which could affect the bond between the surface and Elastobar coating. The surface cleaning can be done by wire brush, air blower, grinder, high-pressure water spray, sandblasting followed with air blowing or water wash.
  • Smoothen the horizontal /vertical concrete surface.

Repair Work
  • Attend damaged/spalled concrete with Elastobar mixed mortar. For filler, the mixing ratio is 1kg cement:1.5 kg fine sand:0.25 kg of Elastobar: Water 0.4 to 0.5 litre. Cure with water for 2-3 days.

Membrane Top Coat
  • Mix 1 part (by volume) of Elastobar, 1 part (by volume) of cement, 1 part (by volume) sand and stir to get a uniform paste. Add the required amount of water to bring this mix to desired consistency apply by brush or roller. Allow to cure and reapply second coat.

Curing & Drying: Sundry (>/=25°C) for 6 -12 hours.

 

View Complete Details

Yes, I am interested!
© Zydex Industries. All Rights Reserved (Terms of Use)